Secret Jardin offers a complete range of web support to hold your plant : the WEBIT.

If your tent has a space booster – 4 horizontal bars – see section – you will be able to attach your WEBIT with the spacce booster using the CableIT provided, this will stretched them further.

Web Plant Support 60x60 cm

Web Plant Support 90x90 cm

Web Plant Support 120x120 cm

Web Plant Support 150x150 cm

Web Plant Support 120x60 cm

Web Plant Support 240x120 cm

Web Plant Support 300x150 cm

300w Swiftair Temperature Controller

The SW-TEMPSP-CON controller is equipped with an electronic temperature and speed control unit and automatically changes the speed (airflow rate) with respect to the temperature in the ventilation duct or in the premises.

The front panel of the controller has the following controls and indicators:

Speed control knob for low speed setting, Temperature control knob for temperature setting

Thermostat operating indicator (LED light)

3m long probe attached

If the air temperature increases above the thermostat set point the fan switches to the high speed (maximum airflow rate). If the temperature decreases below the thermostat set point  the fan switches to the pre-set lower speed.

The motor switches to high speed as the air temperature exceeds 2 ° C above the set thermostat set point.

PLEASE SELECT YOUR ITEM ABOVE

ROOT!T® Heat Mat - Get a jump start on plantings with the ROOT!T Heat Mat!

Adding uniform heat to your plants will speed up germination by days! ROOT!T Heat Mat offers more uniform heating than others on the market with its intricate pattern of fine wire throughout its waterproof, frayproof layers delivering the durability to withstand rugged greenhouse environments.

This mat warms the rooting area to the ideal temperature required for perfect propagation, whether seed-germination or rooting cuttings. A thermostat is also available for these heat mats offering complete temperature control.

Speeds up germination/striking of cuttings by several days
Warms root area 5.5-11˚C over ambient temperature
Fully waterproof, fray proof and durable

Sizes available:
Small - 25cm x 35cm
Medium - 40cm x 60cm
Large - 40cm x 120cm

Swiftair Digital Heat Mat Thermostat

PLEASE SELECT IF NEEDED

Electronic temperature controller is compatible with all heat mats and is an optional accessory for the Heat Mats.

The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.

Features:

Easy to use and control
Temperature control
range 20ºC to 42ºC
Controls temperature of heat mats evenly in colder/warmer than normal environments
Provides constant optimum temp for specific plants.
Easy plug-in operation
Indicator light
Simple to use
2 YEAR WARRANTY

ESSENTIALS Versions (Ess)

Digital 2 Way Thermometer/Min Max Meter (with Probe) 

Nutrient temperature measurement is via a thin waterproof probe. The Min/Max memory records the highest and lowest temperature values. Can display in °F or °C.

Digital Min-Max Thermo Hygrometer 

At the push of a button, it will display the highest and lowest values recorded since the unit was last reset. Can display in °F or °C. 

DIGITAL SERIES(LARGE SCREEN SQUARE)

Min Max Thermometer and Hygrometer 

An indoor thermometer and hygrometer which displays temperature and humidity. It can display both °C and °F and has a memory of MIN/MAX value of temperature and humidity. Other features include: - Two modes of time display: 12hr/24hr - Everyday alarm - Calendar display - Clock and date

Indoor/Outdoor Min Max Thermometer (with Probe)

This thermometer automatically changes temperature display every five seconds to show the indoor and outdoor temperatures as well as indoor humidity. It can display in both °C and °F and has a memory of MIN/MAX value of temperature and humidity. Other features include: - Two modes of time display: 12hr/24hr - Everyday alarm - Calendar display - Clock and date

Lumii 24 Hour Plug in Timer

The LUMii 24 Hour Plug In Timer is ideal for setting day and night on/off lighting period as well as setting a heater on periods and timing irrigation cycles. 
It is reliable and has a high quality timer unit. This timer has been designed to take a 13 amp plug so there is no need to remove the plug to reset the controls. 
There are 96 switching operations within a 24 hour period (every 15 minutes). 

It is ideal for setting on and off (day and night) periods with CFL and T5 as well as LED grow lights and timing pumps for irrigation cycles.

PowerPlant Heavy Duty Timer -Powerplant Heavy Duty 24 Hour 15 Minute Grow Light Timer 600W Hydroponics

Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on. 

The PowerPlant Heavy Duty Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast. 

This means no separate contactor is required and saves you money. It has a 96 switching operations within a 24 hour period (every 15 minues). 

This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers.

This unit is ideal for timing 400w and 600w ballasts. Do not use more than one 600w ballast per timer.

LightHouse ECOHEAT Greenhouse Heaters

Available in 3 Sizes

45w - 305mm

80w - 603mm

135w - 915mm

Protection against sudden temperature and humidity fluctuations which can stress plants.

Helps reduce humidity and condensation when growing indoors thus protecting against fungal attack.

ideal in propagation areas where a constant ambient temperature is critical.

Cheap-to-run, the heater uses less then 50w per foot (300mm) power, similar to an ordinary light bulb and 25% less then most similar tube heaters.

More economical than a fan heater, cleaner and safer than paraffin heaters.

IP55 rated, splash and sprinkler resistant

Fan controllers have made previously expensive fan controlling cheap and effective. 

A reduced fan speed means significantly reduced noise levels. Plug your fan directly into the unit and then plug the unit into the wall. No wiring is required.

You can control the fan speed by turning the knob on the front of the unit.

Simple, Low Cost, Effective

Features:

Maximum power: 300W or suitable for fans up to 200mm (8 Inch)

Please always check wattage of fan

Voltage: 230V, 50Hz

Made for UK sockets & plugs

No wiring required

LUMii Rope Ratchet - Pack Of 2

The LUMii Rope Ratchets pull tight and lock into place.

They are really durable.

The LUMii Rope Ratchets are tough and will not let you down whilst they are also heat and cold resistant.

Each LUMii Rope Ratchet has two quick release carabiner clips for ease of use and 2.4 metres of tough braided polypropylene rope.

Garden soft tie is 8 meters long. It gently secures plants with padded tie that will not cut into the stems

3.5mm x 8M 

Will Not Cut Into Stems !!

• Memory function for 10 readings allowing for readings to be tracked easily
• Water Resistant
• Shock Resistant
• Low Battery Alert
• Simple calibration using VitaLink Essentials Calibration Fluid

• Memory Function - This allows a grower to check and log changes in the EC levels and correlate changes to potential alterations that may be taking place
• Water resistant - If the meter is accidently dropped in a solution, it will float and not break if taken out of the liquid immediately and dried quickly
• Shock resistant - Shock resistance allows for accidental dropping of the instrument without breaking
• Low Battery Alert - Gives a warning when there is 2 hours running time left, so you can change the battery in good time
• Energy saving shut-off - Turns off the meter when it is not in use
• Simple Calibration using VitaLink Essentials Calibration Fluid - Some meters can be complicated to calibrate. Simply dip the probe in the solution and press the CAL button until CAL appears onscreen.

Syringe

Used to take an accurate amount of concentrate to mix with water or add to your tank. A must for all grow rooms. This is a small lab grade syringe.

Modular drying system

This multi-layer Round Dry Net has been designed to hang in a grow tent to allow customers to dry their flowers or herbs.

But could be used to dry anything not to heavy

Mammoth 45

48cm shelf (with 9cm lip)

Fully collapsible – fits into a 17cm x 17cm area

Simple to use – just hang it with the supplied s-hook

Perforated material provides plenty of air movement

Mammoth 80

Diameter of 68.5cm

Fully Collapsible

simple to use

Perforated material provides plenty of air movement

Alu Tape - 45mm WIDE x 45m Long

Applications:

Insulating material for various construction, repair and mounting operations at ventilation, grow tents, sheeting and air conditioning systems.

Insulation and protection of pipe joints, air ducts, casings, assembly units, etc.

Sealing of joints and seams in case of reflecting material insulation to reduce thermal losses.

Reliable protection of equipment components against vapour, dirt and dust penetration. Corrosion protection

** There is NO additional postage charge for multiple purchases **

A peel and stick zipper system allowing easy access and light control for any enclosure. 

Comprises a high quality, easy install zip that creates easy access points into any enclosure using plastic sheeting.

LightHouse Black White LITE (85 µm) – 2m x (Please Select) Roll

Stadard reflective sheeting – high levels of reflection and diffusion

High levels of reflection and diffusion, the LightHouse Black White LITE sheeting is flame retardant and have been manufactured

to the highest levels to maximise the use of light in your growroom.

It can be used to cover walls, floors and ceilings.

The LightHouse Black White LITE is available in from 2m to 100m please see shop.

Please Select which size you require above

Our Ballast is great for growers who have not moved on to digital ballast but still require a high quality lighting system.

A fully vented ballast to keep heat to a minimum.

~ Fully vented for maximum cooling and efficiency. (will still get hot)

~ Suitable for HP Sodium, Dual Spectrum and Metal Halide Lamps.

~ 250w Ballast Suitable for 250w HPS & MH Bulbs

600w Ballast Suitable for 600w HPS & MH Bulbs

~ Plug into your reflector with no additional wiring.

~ Fused and surge protected.

RAM Ultrasonic Humidifier 5 Litre

The RAM Ultrasonic Humidifier allows the grower to increase the humidity of the growing environment up to 400ml / hour. 

Complete with a 5L tank, this humidifier is fully adjustable and easy to use. Power - 30w Voltage - 220-240v

RAM Ultrasonic Humidifier 13L

The RAM Ultrasonic Humidifier 13L Tank offers the biggest tank capacity of any humidifier on the hobby market. 

It has a humidification rate of 1100ml per hour and offers an analogue control allowing you to set the unit to produce the amount of humidity that you need. Four nozzles and an extra hole allow you to get an even distribution of mist in your growing environment.

The unit also offers auto cut-off which protects the humidifier in cases where your water reservoir becomes empty.

The PLANT!T YoYo tightens as your plant grows, eliminating the need to re-hang everyday.

It comes with a 1.4m fully retractable line and is ideal for fruiting crops e.g. tomatoes or other vine crops.

Designed to secure and support as well as train a variety of unruly or heavy cropping plants in their desired position.

Can also be used to support heavy cropping trusses.

Simply wrap around your plant and secure around the stem with the hook and watch your plants grow straight and true.

"YoYo's are a very useful device for the tomato grower and I shall be using them every season from now on!" - Nick Chenhall - Tomato Growing

* 1 pair of easy rollers hangers yoyo for hydroponics grow tent

Product Features:

* The easy roller hangers will support your grow tent light(s) and reflector(s) - up to 10kg in weight per pair.

* Simply hook the easy rollers on an appropriate fixture, fasten the nylon suspension cords to the hanging brackets on the reflector, adjust to the required height and tighten the butterfly clamp to secure.

* Please use two easy rollers for each reflector to achieve a level position.

* Comes with metal hooks to attach your lights easily.

* Let you adjust the height of light(s) and reflector(s) in seconds with ease.

* A must have item for your grow tent.

LUMii Contactor Timers

A major problem with hydroponic lighting is timer failure, something you will NOT get with our LUMii Contactor Timers. 

Available in 2, 4, 6 and 8 way units – all sizes boast the world leading Grasslin timer and are designed, assembled and quality checked in the UK. The LUMii contactor timers are the most robust and professional on the market. 

All sizes are fitted with protection covers for all sockets and floor pads for floor use. Included with two brackets, they are wall mountable and can be hung in a grow tent.

The grow gadgets laser thermometer is a compact, lightweight and low cost infrared thermomenter, ideal for use around your grow space.

To use simply aim at your desired location and pull the trigger to display the temperature of the item being measured.

Identify insects and diseases

All active eye products have a pest identifier included.

Active Eye Microscope (60x - 100x)

The compact design provides 60x to 100x magnification and houses a built in light and a zoom lens.

Simply place the base of the microscope on to the specimen and adjust the focus by gently turning the focusing dial until your item comes into perfect view.

comes with protective pouch and instructions

batteries included

Active Eye Microscope (100x)

The compact design provides 100x magnification and houses a built in light.

simply place the base of the microscope on to the end of the specimen.

comes with protective pouch and instructions

batteries included

Magnifier Loupe (30x)

A great little magnifier that gives you 30x magnification

Provides a sharp, clear, enlarged image without distortion and features a swing away protective lens cover that also serves as a handle.

Comes with protective case and instructions.

Mountain Air® EC Whisper Silencer High Speed Fans represent the ideal solution for those looking to combine high performance with whisper-quiet operation. The dual impeller and turbine-style inlet are designed to optimise pressure throughout the fan housing, improving airflow when paired with long or complex ducting runs. Courtesy of the insulated housing, the EC Whisper High Speed fan delivers class-leading performance whilst remaining near-silent even at full power.

• Air transfer or extraction
• Class leading performance
• Duel impeller and turbine style inlet
• Professional and hobbyists’ gardens
• High power output with whisper-quiet operation
• Ideal for systems requiring shorter ducting lengths
• Optimised pressure within fan housing improves air flow

-------------------------------------------------------------------------------------------------------------

150mm

----------------------------------------------------------------------------------------------------------------

200mm

-----------------------------------------------------------------------------------------------------------------

250mm

A humidifier is a key component to making your grow room the best environment possible. Using a humidifier, you are able to control the humidity in your grow room environment. Allowing you to reach the optimum level of humidity for your plants. The RAM Wall Humidifier is a wall mounted unit allowing for extra floor space without sacrificing your grow room environment. The easy-to-use humid-stat control dial allows for a simple control system from 20% to 100% humidity. The RAM Wall Humidifier as a stand-alone product or can be used alongside a Water Filter Kit.  Users in hard water areas are particularly recommended to use a water filter with the humidifier, to protect its longevity.

Key USPs:

Prevent dryness in your growing environment

Easy-to-use dial humidistat control

Up to 1600 ml/hr output

No refills required – mains water connection (all fittings included)

Features and Benefits

Mains water connected – means a continual supply of water. As a result, there is no need to keep topping up the humidifier, leaving your machine always ready for use.

Easy to use dial humid-stat control – simple control. Allowing controlling your humidity to become a straightforward task.

Wall mounted fitting – growers can enjoy outstanding RAM quality along with efficient usage of their grow room space.

Technical Specifications

Input     220-240 V AC | 50 Hz

Power   120 W

MAX. Output     1600 ml/hr

Science behind the product

An ultrasonic humidifier uses a ceramic diaphragm vibrating at an ultrasonic frequency to create water droplets that quietly exit the humidifier in the form of cool fog/mist.

We cannot stress enough the importance of maintenance and storage solutions. Expensive equipment is often utilised well below its full capabilities due to lack of proper maintenance of sensors.

pH probes should always remain in Meter Store when not in use to prevent the probe from drying out. With VitaLink ESSENTIALS Meter Store, keeping pH probes in tip top condition is no longer a problem.

Includes probe foam to cut to the size of your meter cap to assist in keeping the probe wet.

Also available Essential pH Meter and PLANT!T pH meter

The PLANT!T pH meter is reliable and easy to use. Small and lightweight, it is ideal for any growroom.

The PLANT!T pH meter features:

The LCD dual display shows pH and tempeature readings

Calibration is easy with a one touch autocalibration and can give upto a 3 point calibration

The meter is IP65 waterproof rated

This trimmer is medium sized (16") with stainless Steel Construction

Helps with trimming roots and leaves 
Can be rotated clockwise and anti-clockwise
Can be dismantled to take up less space 
Easy cleaning
Light weight
Easy to use and carry

Size - 16"
Total dimensions 405 x 400 x 360mm
Weight - 6kg
Stock Code - SW-BTRIM-16

The reach through mesh allows the trellis netting to handle more weight and remain taught and therefore provide stronger support.

This product is non tangle which can be a common problem with netting.

Time Display

Indoor Temperature Range: -10 to 50 Degree C

Humidity Range: 20% to 95%

Shows: Min / Max

Shows: Too Dry - Comfort Zone - Too Wet

FREE - 5ml Pipette!!
Narrow Spectrum kit - Our ESSENTIALS pH Test Kit is good for 150 tests. At a rate of 3 tests per week, it will last one year. This makes it excellent value for money. Covers a pH range of 5.6-7.4 measuring in 0.2 increments.

Wide Spectrum kit - Our ESSENTIALS pH Test Kit is good for 150 tests. At a rate of 3 tests per week, it will last one year. This makes it excellent value for money. Covers a pH range of 4-8.5 measuring in 0.5 increments.

Take an accurate amount of concentrate to mix with water or add to your tank. 

A must for all growrooms. 

This is a small lab grade measuring jug.

Quiet Box Fan (QBF) fan design allows for supply and extract ventilation for areas/rooms with high requirements to low noise levels and limited mounting space. 

Temperature Controller is included 

Units can be installed above ceilings or in loft spaces. Suitable for connection with 100 (4"), 125 (5"), 150 (6"), 200 (8"), 250 (10") and 315 (12") mm round ducts.

Sound level and Fan Volume

100mm - 240m3/hr - 33 dBA

125mm - 330m3/hr - 35 dBA

150mm - 420m3/hr - 36 dBA

200mm - 730m3/hr - 38 dBA

250mm - 1300m3/hr - 41 dBA

315mm - 2150m3/hr - 43 dBA

Design

The fan casing is made of galvanized steel sheet and provided with heat- and sound-insulating material.

Motor

The centrifugal impeller with back-curved blades is powered by means of 2-pole asynchronous motor with external rotor. The motors are equipped with built-in thermal overheating protection with automatic restart. Motor ball bearings with selective lubricating oil ensure low-noise and maintenance-free operation.

Single Socket Controller

The SMSCOM MK2 Smart Fan Speed Controller really is a smart piece of kit for automatically controlling the running speed of just one fan or with an extension lead multiple fans, to maintain your grow room at the temperature you require.

If using Multiple Fans please do not Exceed 6.5A

The SMS Smart Fan Speed Controller has built in software that constantly reads the temperature from the probe and then adjusts the running speed of the fan to suit, either faster to cool the room down or slower to heat it up.

The SMS Smart Controller is a plug and play unit that involves no wiring, simply plug in your fan and set your desired temperature and then let this smart controller do the rest.

If you use a grow tent with just one fan for extraction and fresh air passively pulled in, the SMS Smart Fan Speed Controller is the ideal partner to automatically maintain the ideal running speed for your extraction fan.

5 year Warranty - Software controlled - Smooth fan speed adjustment - Optimise grow room temperature - Constant air flow - Plug and play – no wiring necessary - 2m Temperature Sensor (Optional) - Minimum fan speed can be adjusted

Accurate to +/- 1 degree - MAX Load 6.5A

Twin Controller - 4.5 or 7amps

Control your temperature with the speed of your fans – all you need is an SMSCom controller.

Your intake and extractor fans will speed up if your room needs cooling, or slow down if it needs heating (temperature sensor included).

Don’t worry about air exchange – you can set minimum and maximum fan speeds.

It’s easy to set up! No hard wiring’s needed. Just plug your fans in, then set your target temperature, min speed & max speed using the 3 dials.

If you need a longer power cable, you can quickly plug it into your controller's IEC socket (like what lots of kettles have!). 

For safety, each controller has a replaceable fuse. 

Overall, your controller can handle a total 4.5 Amps to 7 amps depending on the controller selected. 

• Tidy, small & easy to use

• No hard wiring needed

• Save energy – fan speed slows when you need it to

• Easy to connect - plug and play!

• Simple to program (via 3 dials)

• Power cable included (90cm)

• Temperature sensor included

• Min speed: ensure there’s adequate air exchange

• Max speed: ideal for oversized fans

• Handles 4.5 Amps in total

• Protective, replaceable 4.5 Amp fuse

• IEC power cable connection

• Features 2 x 3 pin UK plug sockets

The PLANT!T® Circular Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.

No plumbing needed- easy to install and simple to use. The water timer is also weather resistant and has an auto safety valve shut off for when the battery is low.

The LUMii BLACK contactor timer is a simple and cost-effective solution for grow light scheduling, ensuring that plants get the optimum levels of lighting throughout the day. The mechanical timer is easy to programme in 15-minute increments, while the relay switch safely turns on HID lights without causing a power surge or overloading the timer.

The lightweight, flexible power bars take up to 13 Amps each (available in 4-way and 8-way), for maximum efficiency we recommend running no more than.

3 x 600 W per 4-socket power bar

4 x 400 W per 4-socket power bar

4 x 315 W per 4-socket power bar

To set up, simply push the timer pins down to indicate “ON” periods, centrally position the ON/OFF switch onto “timer” mode, plug in ballasts to the 4-socket power bars and plug both contactor timer plugs into 2 x 13 Amp mains supplies sockets.

All Autopot fittings are measured by their outside diameter. 4 mm i.d. = 6 mm o.d. 13 mm i.d. = 16 mm o.d.

Products available:

please select from the drop down menu

1Pot tray
2Pot tray
1potXL Tray & Lid
8.5 litre pot
15 litre pot
25 litre XL pot
6 mm T-connector
6 mm Straight connector
6 mm Filter incl. membrane (fits inside tank)
6 mm End stops
6 mm Cross connector
6 mm In-line tap
Click-fit tank adapter & filter with 6 mm outlet
6 mm Top hat grommet
16 mm to 6 mm T-connector
16 mm to 6 mm Cross connector
16 mm Elbow
16 mm Cross connector
16 mm End stop
16 mm T-connector
16 mm Straight connector
16 mm to 6 mm Inline filter
16 mm In-line filter
16 mm In-line tap
Click-fit tank adapter & filter with 16 mm outlet
16 mm Top hat grommet
6 mm Black flexi tubing - 1.5 m length/50 m roll
16 mm Flexi tubing - 30 m roll

This handy little leaf trimmer goes together easily. Simply insert the legs into the holes provided and attach the mesh catch bag, plug in, and it is ready to use.

Please make sure you wear safety eye wear and tight gloves when operating.

This trimmer has sharp rotating blades that may, through carelessness cause injury to fingers.

Easy to put together & even simpler to use

A quick & effortless way to trim

Compact design only requires 4ft of space

Easily accessed for maintenance

Equipped with a Powerful, efficient and quiet motor

220-240v 50Hz

Designed with auto-shut off when cutting box is opened

1 YEAR WARRANTY

Use your mobile to take amazing magnified photos and videos.

 Attach this phone scope directly to your mobile or tablet, aligning the microscope lens with your device's camera lens.

 This device allows you to zoom up to 30x magnification using your device's digital zoom!

The LightHouse Wireless Thermostat is easy to use and set-up. 

The plug and play unit can control heating or cooling equipment by altering the setting.

Natural Coloured Cable Ties 

suitable for ducting up to 160mm 

total cable tie lenght: 530mm x 4.8mm

This resealable bag is the ideal product to maintain the freshness of all herbs and seeds.

These are sold in packs of 5

Packs of 25 please select size from drop down menu above

Natural Finish

Use indoors or outdoors

Strong and durable

Lightweight stakes have smooth, attractive finish

LightHouse StretchNet is made from the highest quality elasticised cord that is knotted into one piece of netting to give additional strength.

Simply attach the StretchNet to the poles of your tent at the desired height to give support to your growing plants.

For best results - use 2 or 3 StretchNets per 2m high tent dependning on the height of your pot. Size can be adapted and suitable for tents up to 1.2m2.

Hooks will fit poles up to 23mm diameter.

Plastic coated with a cutting tool built into the dispenser

Ideal for tying plants vegetables and vines

50M roll

Grow Gadgets Prescision Digital Scales are ideal for measuring powdered nutrients - 0.1g/2000g

Product benefits:

Auto zero function - easily deduct the containers weight with the auto zero function to obtain an acurate measure of the contents of the container.

Huge measurement range - 0.1g to 2000g

60 second auto power off

x2 transparent trays

Body size - 127mm x 106mm x 19mm

Stainless steel weighing platform - 100mm x 100mm

Blue backlight

PCS counting Function - 25, 50, 65, 75, 100

Unit conversion - G, OZ, OZT, DWT, GN, CT

• Memory function for 10 readings allowing for readings to be tracked easily
• Water Resistant
• Shock Resistant
• Low Battery Alert
• Simple calibration using VitaLink Essentials Calibration Fluid

• Memory Function - This allows a grower to check and log changes in the EC levels and correlate changes to potential alterations that may be taking place
• Water resistant - If the meter is accidently dropped in a solution, it will float and not break if taken out of the liquid immediately and dried quickly
• Shock resistant - Shock resistance allows for accidental dropping of the instrument without breaking
• Low Battery Alert - Gives a warning when there is 2 hours running time left, so you can change the battery in good time
• Energy saving shut-off - Turns off the meter when it is not in use
• Simple Calibration using VitaLink Essentials Calibration Fluid - Some meters can be complicated to calibrate. Simply dip the probe in the solution and press the CAL button until CAL appears onscreen.

4 Way Gang 2 Metre Extension Lead Cable Plug Socket 

4 Sockets

13amp - 13a / 240v ac 4G Ext

2m x 1.25mm 3 Core Cable

Vinyl gloves provide maximum protection and comfort during use, and are tear resistant.

19 dram (80ml) premium child resistant pop top bottles.

Famous for the ‘pop’, simply squeeze the sides near the top of the bottle and the lid will pop open easily. 

Choose from a variety of translucent colours – smoke, blue, clear and green – and get durable, Plastic packaging for herbs, edibles and concentrates.

These bottles, in addition to their fantastic design with tight seals to preserve freshness, will also provide peace of mind as they’re child resistant. 

Competitively priced, bulk buy and enjoy all the benefits

--

RX Labels are high quality and affordable sticky labels for your bottles, tubes and barrier bags, providing clear and concise organisation for storage and sales.

Each label has an attractive matte finish, making it simple to mark details about bottle contents on the side. These labels contain generic warnings and allow you to customise each bottle with information specific to the edibles, herbs and concentrates inside.

These labels are for show only/Novelty item

GROW LIGHT TO CFL CONVERTOR LEAD (UK PLUG)

LUMii HID to CFL Converter Lead - UK Plug

If you want to use a CFL bulb with a IEC reflector, you can. The LUMii® HID to CFL Converter Set allows IEC reflector leads to convert to a plug lead. This kit contains a short additional cord set (UK or EU plug available) to convert the supplied IEC to a conventional power supply, as well as an innovative support device (for use with the LUMii® MAXii reflector) to assist with the additional weight of a CFL bulb

(THE GREEN SUPPORT HANGER SHOWN ONLY FITS THE THE LUMii MAXii REFLECTOR)

(You can still use the Green support but will need to be taped or fixed to other reflectors)