Ventilation & Extraction

Swiftair Temperature Hydroponics Fan Speed Controllers Silent Climate up to 950w
translation missing: en.products.product.regular_price £24.99
translation missing: en.products.product.regular_price £24.99

300w Swiftair Temperature Controller

The SW-TEMPSP-CON controller is equipped with an electronic temperature and speed control unit and automatically changes the speed (airflow rate) with respect to the temperature in the ventilation duct or in the premises.

 

 

The front panel of the controller has the following controls and indicators:

 

Speed control knob for low speed setting, Temperature control knob for temperature setting

 

 

Thermostat operating indicator (LED light)

 

3m long probe attached

If the air temperature increases above the thermostat set point the fan switches to the high speed (maximum airflow rate). If the temperature decreases below the thermostat set point  the fan switches to the pre-set lower speed.

 

The motor switches to high speed as the air temperature exceeds 2 ° C above the set thermostat set point.

 


 

 

 

 

 

 

4
translation missing: en.products.product.regular_price £44.99
translation missing: en.products.product.regular_price £44.99

Small Fan Filter Kit - 4" up to 110 m3/h airflow rate
Hydroponics Fan, Filter & Duct Kit
A great little fan kit designed for small growing area's with no more than 2.5m duct run.
Ideal for small LED & CFL setups
Quiet
110m3/hr Centrifugal Fan (cable & UK plug fitted)
100mm Carbon Filter Filter
5m of Flexible Duct
Duct Clip x 3
Fan
Single speed fan 
comes with stand attached to screw to floor (can not see in picture)
Up to 110 m3/h.
Quiet operation
Power lead & UK Plug supplied 
Filter
activated carbon filter.
100mm 4” dia
18 month life span under normal conditions.
Duct
5m length
Rest of kit
Jubilee worm drive clip x 3

 

 

Ducting Hydroponic Fan Carbon Filter Padded Fast Clamp 4 5 6 8 10 & 12 Inch
£5.99

Sizes Available:

4", 5", 6", 8", 10", 12"

High Quality Hydroponics & Ventilation Padded Clamps (Collars)

Fast Clamps are perfect for connecting fans, carbon filters, silencer and rigid ducting.

The metal band has a foam lining so reduces fan vibration!

If you need to connect your fan directly to filter for example it's much better to use a padded fast clamp than an connection method such as duct tape.

Heat and humidity in your grow area can often cause duct tape to peel meaning it must be replaced.

Available in all ducting sizes from 100mm 4" to 315mm 12" dia – PLEASE SELECT ABOVE

Reduces fan vibration.

Pull out eyelets for easy hanging.

The best choice for connecting fans to carbon filters, silencers or rigid ducting.

Please see our shop for more products!

6
£13.99

6" Clip fan or 8" Clip Fan

 

Quality 2 speed fan, and Off

Lower noise design,

Up/down tilt and rotate,

 

8" can be wall mounted if needed 

12 months Warranty,

Comes with UK Plug already wired 

CE Approved

6" 150mm doe not oscillate on its own you can turn them by hand to change the direction

Hydroponics Grow Room Flexible Acoustic Insulated Ducting 4
£12.99

Laminated Aluminium Silver 5m or 10m LONG Ducting

Insulated ducting is very good and reducing noise level and also keeps condensation down

Insulated ducting will keep the heat in the duct without it all escaping into the loft etc 

1st Layer - Alu Ducting

2nd Layer - Insulation

3rd Layer - Alu Coat

Please select size and length needed above

****.....: THERE IS NO ADDITIONAL POSTAGE CHARGE FOR MULTIPLE ITEM'S:.....****

Phonic Phonitec Trap Acoustic Duct 3m 6m 10m Ventilation Extraction Hydroponics
£18.99

The NON-WOVEN PMP BLACK consists of a Polypropylene fabric cloth inner duct, thermically and acoustically insulated with a Polypropylene insulation layer and provided with a black polyester outer jacket.  The inner duct is hydrophobic and Anti-Bacterial. 

 

 APPLICATION:

 

Air-conditioning systems

Air supply systems

Preventing condensation in air ventilation systems

Decreasing of machine noises 

 

SPECIFICATIONS  PRESSURE LOSS (STRAIGHT DUCT) Article code: SBIPMPB{Ø}NW  

 

 Temperature range: -30 ⁰C to 140 ⁰C

  Operating pressure: up to +2500 Pa Operating air velocity: max. 25 m/s Min.

bending radius: 0.54 x Ø + 25mm

Standard diameter range: 102 – 406 mm 

Standard length: 3, 6 and 10 mtr  

 

CONSTRUCTION

Inner duct: Non-woven Polypropylene fabric cloth

Insulation blanket PP: 25mm, 16kg/m³ 

Outer jacket: Poly laminate R-value glass wool: 0.55 m² K/W (ASTM C177-76)

Appearance: Black

The NON-WOVEN PMP BLACK fulfils all the requirements and are classified as specified within EN 13180: Ventilation for buildings – Ductwork - Dimensions and mechanical requirements for flexible ducts.

 

Hydroponics Grow Room Flexible aluminium Ducting 4
£6.49

An extremely flexible reinforced aluminium foil flexible supply or extract ventilation ducting.

Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix. Fire resistant. Available in 5 or 10 metre lengths.

See drop-down menu for all sizes and corresponding prices.

4
£29.99
Inline fan with UK plug

 

In this kit you will receive

 

(fan with EU plug + UK adaptor) - Select Size

1 x 5m ALU Ducting

1 x 1m ALU Tape

1 x 4" Carbon Filter

 

Inlet side will fit on to Carbon filter or Grille Spigot

 

 

Exhaust side will fit into ducting 

Airflow

4" - 107m3/hr

5" - 190m3/hr

6" - 270m3/hr

 

 

Sound Level dBA

4" - 35 dBA

5" - 36 dBA

6" - 38 dBA

 

 

Wattage

4" - 14w

5" - 18w

6" - 22w

 

 

 

exhaust or Supply ventilation of bathroom, showers, kitchens and other.

 

 

 

Designed for PVC duct systems or flexible ducts. 


The case and the impeller are made of high-quality durable ABS plastic,this is not affected by UV

.

Slider bearings motor equipped overheating protection.

 

 


Different inlet & exhaust flange diameter

 

 

 

Inlet side will fit on to Carbon filter or Grille Spigot

Exhaust side will fit into ducting 

 

 

4 5 6 inch In Line Hydroponic Grow Room Air Inlet Tent Carbon Spigot Fan
£9.99

Inlet side will fit on to Carbon filter or Grille Spigot

 

 

Exhaust side will fit into ducting

 

 

 

Inlet side will fit on to Carbon filter or Grille Spigot

Exhaust side will fit into ducting

exhaust or Supply ventilation of bathroom, showers, kitchens and other.

Designed for PVC duct systems or flexible ducts.

The case and the impeller are made of high-quality durable ABS plastic,this is not affected by UV

Slider bearings motor equipped overheating protection.

Different inlet & exhaust flange diameter

Inlet side will fit on to Carbon filter or Grille Spigot

Exhaust side will fit into ducting

 

 

 

Airflow

4" - 107m3/hr

5" - 190m3/hr

6" - 270m3/hr

 

 

 

Sound Level dBA

4" - 35 dBA

5" - 36 dBA

6" - 38 dBA

 

 

 

Wattage

4" - 14w

5" - 18w

6" - 22w

 

 

 

TIP:

The less ducting you use the more suction (airflow) you will get we recommend using the shortest run possible

 

 

 

 

Recommended Length 2m of Ducting MAX

 

 

Hydroponic Grow Fan Tent In line Complete Carbon Filter Duct Kit 4
£59.99

SMF Standard Model with Plug

 

Kit Comes with the following

 

5m - Aluminium ducting

 

3 x Clamps

 

4" 5" 6" Fan with Plug

 

 

 

Standard Model Comes with plug how ever this does not need to be used if not needed

 

SMF fans are applied for supply and exhaust ventilation systems of commercial, office, tents, carbon filters and other premises etc.

 

Compatible with Ø 100, 125, 150mm round air ducts.

 

 

Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

 

Combi Ducting 4
£6.99

Combi Ducting is designed specifically for Hydroponic & Indoor Grow Room Set ups

Comes in 3m and 6m lengths

Aluminium foil inner layer.

Durable light retaining black outer layer.

Will not set on fire under extreme temperatures i.e. near to lighting.
Suitable for commercial and industrial low, medium and high-pressure heating, ventilation and air-conditioning systems.

See drop-down menu for all sizes and corresponding prices.

Secret Jardin Monkey Fan Clip on Grow Tent Pole Mounted Space Saving 16w 20w 30w
£19.99

Monkey Fan 16W

 

 

Revision               R1.00

 

Net Weight         0.60 kg

 

Dimensions       W x H x D: 19.5 x 20 x 20 cm 

Grid Diameter : 19 cm

 

Propeller Diameter: 15.2 cm 

Recommended size        Up to 1.5 m2

 

Speed Rotation: 1500 & 2250 rpm 

Wind speed at 70 cm: 1.8 m / s

Voltage 198-264 V / 50Hz

 

 

Power   16 W

 

Cable & Plug      

 

 

Cable length 240 cm UK (Type G)

 

 

Monkey Fan 20W Oscillating

 

 

Revision               R1.00

 

Net Weight         1.00 kg

 

Dimensions       W x H x D: 21 × 20 × 21 cm

 

 

Grid Diameter : 21 cm 

Propeller Diameter : 17 cm 

Recommended size        Up to 3 m2

Speeds Rotation: 1500 & 2300 rpm

 

Wind speed at 70 cm: 2.0 m / s 

Voltage 198-264 V / 50Hz

 

 

Power   20 W

Cable & Plug      Cable length 240 cm /uk plug

 

 

 

30w Monkey Fan 

Note: Blow in a closed angle, allowing to blow far

Revision               R1.00

 

Net Weight         1.1 kg

 

Dimensions W x H x D: 28 x 15 x 25.5 cm

 

 

Grid Diameter : 23 cm

 

Propeller Diameter : 17.8 cm 

Recommended size        Up to 5 m2

Speeds Rotation: 1500 & 2300 rpm

 

Wind speed at 70 cm: 3.7 m / s 

Voltage 198-264 V / 50Hz

 

Power   30 W

 

Cable & Plug      

 

Cable length 240 cm / UK plug

4
£46.99

 

 

Please select your fan size 

You will receive a temperature speed controller with fan

---------------

Swiftair Temperature Hydroponics Fan Speed Controller Fan Speed Silent Climate

 

 

The controller is equipped with an electronic temperature and speed control unit and automatically changes the

speed (airflow rate) with respect to the temperature in the ventilation duct or in the premises.

The front panel of the controller has the following controls and indicators:

Speed control knob for low speed setting

Temperature control knob for temperature setting

Thermostat operating indicator (LED light)

3m long probe attached

Set the desired air temperature (thermostat set point) by turning the thermostat control knob to the airflow rate desired by turning the speed control knob.

If the air temperature increases above the thermostat set point the fan switches to the high speed (maximum airflow rate). If the temperature decreases below the thermostat set point  the fan switches to the pre-set lower speed.

To avoid frequent motor speed switches when the air temperature in the duct is equal to the set temperature point, the speed switch delay is activated. There are two switch delay patterns for various cases.

The temperature sensor-based feedback delay:

The motor switches to high speed as the air temperature exceeds 2 ° C above the set thermostat set point.

 

The motor revers to the pre-set lower speed as the air temperature drops below the thermostat set point. This pattern is used to keep air temperature to within 2 ° C In this case the motor speed switches are rare.

 

 

-----------------

 

XFLO mixed flow fan

 

XFLO fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø 100, 125, 150, & 200mm round air ducts.

Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

A dynamic balanced impeller

Overheating protection

Motor protection rating IP X4

1 Year Warranty

 

Installation to the wall or ceiling can be performed by means of mounting bracket (included). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box.

 

Airflow

100 - 220 m3/h

125 - 330 m3/h

150 - 530 m3/h

200 - 820 m3/hr

 

Noise Level

 

NOISE LEVEL 35 dBA @ 3m - 100

NOISE LEVEL 37 dBA @ 3m - 125

NOISE LEVEL 44 dBA @ 3m - 150

NOISE LEVEL 48 dBA @ 3m - 200

 

 

 

Please not we are changing the name from SMF to XFLO

RAM Quality Quiet 6
£13.99

Please select which Fan you require from drop down menu 

 

RAM 150mm Clip On Fan (6") - 15w

 

The RAM Clip On Fan has a quality high output with quiet motor and sturdy clips. This 150mm (6") fan has 2 speed settings and an adjustable head. It is easy to assemble with a 1.4 metre power cord and multi-region plug.

 

 

-------------------------------------------------

 

The RAM Oscillating Multi Fan has 2 speed settings and includes a 1.4 m power cable.

A versatile fan with multiple applications. Includes multiple clip styles meaning this fan can stand on flat surfaces, hang from a suitable wall screw (not included), clip to a horizontal object, or hang from vertical poles (16-25 mm diameter).

Technical Specification Impeller size: 180 mm (7”) Power: 20 W Voltage: 220-240 V | 50-60 Hz Speed: 2 speed settings
2kw or 3kw green house garden hydroponics heater
£46.99
2kw heater
Keep the Greenhouse temperatures under control with the 2kw Greenhouse Heater. 
Robust, reliable and easy to use these heaters are thermostatically controlled.
The inbuilt fan has 3 different settings. 
Fan Only
1kw with fan 
2kw with fan 
Please note fan runs 24/7 and heater will turn on and off when temperture drops below the temperture set. The fan runs at a low wattage and keeps the air moving giving a good heat thoughout the greenhouse/tent
Dimensions: 230 x 198 x 320mm (l x w x h) 
Heating Area: 20m² 
Air Output: 186 m³/hr
3kw Heater
The LightHouse 3kW Greenhouse Heater is a great tool to use when trying to maintain temperatures during the cooler months. The 3kW powerful output means it can quickly and effectively heat up large spaces. It also allows growers to reach and preserve the desired temperature allowing their plants to thrive. The simple but robust design allows growers to easily use and place in a busy grow room environment. Also, the added feature of 3 power control of different heat settings means the heater is multipurpose, being able to be used both as a heater and a fan.
 
Key USPs:
Easy to use, simplistic and robust design
Quiet Running
3 Power Control Settings
Dual use – can be used as both a heater and a fan
High performing and powerful heater at 3 kW
Overheating safety protection
Precise temperature control with the sensitive thermostat
 
Technical specifications:
Settings Fan only; 1500 W; 3000 W
Mains input        AC 220 – 240 V | 50 Hz
Net Weight         3.6 KG
Power   3050 W
Dimensions        245 x 240 x 310
Plug Fuse             13 A
Thermal Protection (internal)     55 °C
Rating   IP24 
 
Science Behind the Product
This is a fan heater that works by pushing hot air out via an element and fan, being 3 kw, it is more powerful than the majority of hobbyist heaters in the market and enter the ‘professional’ arena of shop space heaters
A function without heater setting means the product can also be used as a simple fan to provide cool and circulating air.
The tubular design is considered ‘professional’ as it emulates gas heaters and is considered more efficient in both its output and the space that it inhabits.
Inline Extractor Mixed Flow Fan 4
£33.99

XFLO Standard Model with Plug

 

 

Standard Model Comes with wired plug how ever this does not need to be used if not needed

 

 

SMF fans are applied for supply and exhaust ventilation systems of commercial, office, tents, carbon filters and other premises etc.

 

Compatible with Ø 100, 125, 150 & 200mm round air ducts.

 

Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

 

 

A dynamic balanced impeller

 

Overheating protection

 

Motor protection rating IP X4

 

Instalation to the wall or ceiling can be performed by means of mounting bracket (included).

 

The fan can be mounted at any angle.

 

 

Airflow

 

XFLO100 - 220 m3/h

 

XFLO100 - 330 m3/h

 

XFLO150 - 530 m3/h

 

XFLO200 - 820 m3/h

 

 

Noise Level

 

NOISE LEVEL 35 dBA @ 3m - 100

 

NOISE LEVEL 37 dBA @ 3m - 100

 

NOISE LEVEL 44 dBA @ 3m - 150

 

NOISE LEVEL 48 dBA @ 3m - 200

 

Please see Picture for Dimensions

 

HerbDryer With Built In Fan Odour Control 30cm 60cm
£11.99

Herb Dryer allows you to easily dry herbs and spices in your own home without worrying about unwanted odors, bulky machines, and moldy results. 

With Herb Dryers unique design, smart ventilation, and odor-preventing filter, you'll get beautifully dried herbs within 7 days.

Benefits:

High-Quality Uniform Drying
The Herb Dryer features a unique air circulation system that has undergone extensive testing to ensure constant air flow for high-quality and uniform drying.

Prevents the Spread of Mold
Mold spreads when there is moisture from herbs and plants are closed in a closed and unventilated area. Herb Dryer reduces the spread of mold due by generating a constant flow of clean, filtered air.

Completely Odor Free
Our odor filtering system prevents unwanted odors from the plants and herbs being dried, and can reduce the spread of allergens from the drying process.

Light-Weight, Compact, Easy to Store
The HerbDryer is foldable and easy to store. Its compact design makes it perfect for small spaces, like a small apartment or even a closet.

Quiet and Discreet
Herb Dryers are often very noisy and visible. Herb Dryer dries your herbs quietly and can work in small or closed spaces, allowing for very discreet use.

Size:
Diameter: 30 cm or 60cm
Height: 35 cm or 65cm

MountainAir whisper EC silencer fan
£59.99

Mountain Air® EC Whisper Silencer High Speed Fans represent the ideal solution for those looking to combine high performance with whisper-quiet operation. The dual impeller and turbine-style inlet are designed to optimise pressure throughout the fan housing, improving airflow when paired with long or complex ducting runs. Courtesy of the insulated housing, the EC Whisper High Speed fan delivers class-leading performance whilst remaining near-silent even at full power.

  • Air transfer or extraction
  • Class leading performance
  • Duel impeller and turbine style inlet
  • Professional and hobbyists’ gardens
  • High power output with whisper-quiet operation
  • Ideal for systems requiring shorter ducting lengths
  • Optimised pressure within fan housing improves air flow

-------------------------------------------------------------------------------------------------------------

150mm

SPECIFICATION 220-240V 110-120V
FAN SIZE 150mm 6"
MAX. AIR FLOW 594m3/h 350CFM
MAX. STATIC PRESSURE 472Pa 0.0685psi
MAX. CURRENT 0.5A 0.6A
PHASE 3 3
FREQUENCY 50Hz 60Hz
OPERATING TEMP. -10~+60°C +14~+140°F
POWER 45W 45W
MAX. SPEED 4800RPM 4800RPM
MAX SOUND OR NOISE 37dBA 37dBA
CERTIFICATE UL94V-0 UL94V-0
INSULATION TYPE CLASS A CLASS A
IP RATING IPX4 IPX4

----------------------------------------------------------------------------------------------------------------

200mm

SPECIFICATION 220~240V 110~120V
FAN SIZE 200mm 8"
MAX. AIRFLOW 1205m3/h 710CFM
MAX. STATIC PRESURE 498Pa 0.0722psi
MAX. CURRENT 0.88A 1.20A
PHASE 3 3
FREQUENCY 50Hz 60Hz
OPERATING TEMP. -10~+60°C +14~+140°F
POWER 75W 0.0722psi
MAX. SPEED 3800RPM 3800RPM
MAX SOUND OR NOISE 37.5dBA 37.5dBA
CERTIFICATE UL94V-0 UL94V-0
INSULATION TYPE CLASS A CLASS A
IP RATING IPX4 IPX4

-----------------------------------------------------------------------------------------------------------------

250mm

SPECIFICATION 220~240V            110~120V
FAN SIZE 250mm 10"
MAX. AIRFLOW 1808m3/h 1065CFM
MAX. STATIC PRESSURE 494Pa 0.0716psi
MAX. CURRENT 1.38A 2.00A
PHASE 3 3
FREQUENCY 50Hz 60Hz
OPERATING TEMP. -10~+60°C           +14~+140°F
POWER 135W 135W
MAX. SPEED 3200RPM 3200RPM
MAX SOUND OR NOISE 40.5dBA 40.5dBA
CERTIFICATE       UL94V-0 UL94V-0
INSULATION TYPE CLASS A CLASS A
IP RATINGS IPX4 IPX4

Hydroponics Mylar Sheet Alu Tape Reflective Heat Proof Self Adhesive Grow Room
translation missing: en.products.product.regular_price £6.99
translation missing: en.products.product.regular_price £6.99

Alu Tape - 45mm WIDE x 45m Long

Applications:

Insulating material for various construction, repair and mounting operations at ventilation, grow tents, sheeting and air conditioning systems.

Insulation and protection of pipe joints, air ducts, casings, assembly units, etc.

Sealing of joints and seams in case of reflecting material insulation to reduce thermal losses.

Reliable protection of equipment components against vapour, dirt and dust penetration. Corrosion protection

** There is NO additional postage charge for multiple purchases **


Y PIECE METAL EQUAL DUCTING CONNECTOR FANS HYDROPONICS 4
£12.99
£12.99

Please Select which size you need above

4" 100mm, 5" 125mm, 150mm 6", 200mm 8", 250mm 10" & 315mm 12"

Y Ducting splitters are designed to split Solid or Flexible Ducting. 

Use either Clamps, or Tape to ensure an air tight fit. 

Please see shop for more sizes

Made from Metal

** There is NO additional postage charge for multiple purchases **

Variispeed 300W Plug In Variable Fan Speed Controller Hydroponics
translation missing: en.products.product.regular_price £8.90 Sold Out
translation missing: en.products.product.regular_price £8.90 Sold Out

Fan controllers have made previously expensive fan controlling cheap and effective. 

A reduced fan speed means significantly reduced noise levels. Plug your fan directly into the unit and then plug the unit into the wall. No wiring is required.

You can control the fan speed by turning the knob on the front of the unit.

Simple, Low Cost, Effective

Features:

Maximum power: 300W or suitable for fans up to 200mm (8 Inch)

Please always check wattage of fan

Voltage: 230V, 50Hz

Made for UK sockets & plugs

No wiring required

Ram 300mm Eco Fan 12
translation missing: en.products.product.regular_price £21.99
translation missing: en.products.product.regular_price £21.99


A compact fan ideal for the space conscious grower for use in grow rooms and grow tents. 
The RAM 300mm Eco Fan features: 

Narrow design 
Louvre fan for even air flow
300mm blades (12") 
It features a 12" blade and 3 speed settings.
The grille will spin on this fan making the air change direction (like an oscillating movement)

Metal Reducer
£8.99
£8.99

All sizes available (please choose from the drop down menu above)

 

 

Small end connectors - Steel, plastic and flexible ducting will fit over the connectors of these reducers

 

 

If connecting to fan spigots or other duct fittings, a short length of duct will be needed.

 

4
translation missing: en.products.product.regular_price £44.99
translation missing: en.products.product.regular_price £44.99

Small Fan Filter Kit - 4" up to 110 m3/h airflow rate
Hydroponics Fan, Filter & Duct Kit
A great little fan kit designed for small growing area's with no more than 2.5m duct run.
Ideal for small LED & CFL setups
Quiet
110m3/hr Centrifugal Fan (cable & UK plug fitted)
100mm Carbon Filter Filter
1.5m of Semi Rigid Duct (better air flow)
Duct Clip x 3
Fan
Single speed fan 
comes with stand attached to screw to floor (can not see in picture)
Up to 110 m3/h.
Quiet operation
Power lead & UK Plug supplied 
Filter
activated carbon filter.
100mm 4” dia
18 month life span under normal conditions.
Duct
1.5m length
Rest of kit
Jubilee worm drive clip x 3

 

RAM Bug Insect Barrier
£6.49

Please select which size and quantity you need above

The RAM Bug Barrier is a fine mesh screen for intake fans to prevent insects in your grow room. 

This screen comes with Velcro strips for you to attach to your intake fan to allow for easy adjustment - creating the perfect fit! 

The RAM Bug Barrier fits over your fan and the ducting can then be out over the RAM Bug Barrier.

Please note: picture shows all sizes in one picture we will only send the size and quantity order thank you

 

 

Vortex Silent Acoustic Fan Ventialtion Grow Room Hydroponics
£229.99
All come with UK plug and speed controller
6" - 619m3/hr
voltage: 220-240V
Frequency: 50/60Hz
Current: 0.71/0.65A
Power: 78/65W
Speed: 3350rpm
Noise: 42db
8" - 1380m3/hr
Voltage: 220-240V
Frequency: 50/60Hz
Current: 1.62/1.2A
Power: 172/130W
Speed: 3300rpm
Noise: 44db
10" - 2500m3/hr
Voltage: 220-240v
Frequency: 50/60Hz
Current: 1.7/1.7A
Power: 200/200W
Speed: 3350rpm
Noise: 46db
12" - 3500m3/hr
Voltage: 22-240V
Frequency: 50/60Hz
Current: 1.62/1.2A
Power: 417/350W
Speed: 3350rpm
Noise: 47db
Ram 16
translation missing: en.products.product.regular_price £26.99
translation missing: en.products.product.regular_price £26.99

 


A cost effective fan for the Grow Room. 
This 40w oscillating fan can be mounted to the wall of a grow room. 

It features a 16" blade and 3 speed settings.

 

METAL Wall Flange
£5.49

Please Select which size you need above

4" 100mm, 5" 125mm, 150mm 6", 200mm 8", 250mm 10" & 315mm 12"

This useful piece ventilation equipment is used to connect ventilation ducting to outlet or inlet vents on a wall or other surface. 

In essence, a spigot is a cylinder of metal with a flange attached to it to enable secure fixing to a surface. 

The flange is secured to the wall and the ducting is connected to the cylinder

Using a spigot to connect ventilation ducting to the exit or intake vent for your system is an effective method of making a secure and reliable connection. 

The flange of the spigot can screwed or glued – or both – over the ventilation hole. Many customers use sealant around the flange once it is fitted to ensure an airtight connection. 

The ventilation ducting can then be attached to the spigot using a ducting clip or duct tape.

Please note: if screwing to the wall you may need to make screw holes through the flange

 

4
£44.99

Please select size above 

4” 100mm, 5” 125mm 6” 150mm 8" 200mm, 10" 250mm & 12" 315mm 


STUBE fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. 

Compatible with Ø 100, 125, 150, 200, 250, 315mm round air ducts.
These fans have a metal casing, Because of the casing they are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

The impeller with backward curved blades is powered by a single-phase asynchronous AC motor with external rotor including the following features: 
A dynamic balanced impeller with backward curved blades balanced in two planes.
Overheating protection with automatic restart.

 

 

Maintenance-free ball-bearings used with motors and designed for at least 40 000 hours operation. 

 


Motor protection rating IPX4 

 


Installation to the wall or ceiling can be performed by means of mounting brackets (included in the delivery). 

 

The fan can be mounted at any angle.
Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box 

(Wire and plug supplied plug straight in and turn on) 


If you do not wish to use the plug please wire directly into terminal 

Airflow
STUBE100 - 300 m3/h
STUBE125 - 400 m3/h
STUBE150 - 600 m3/h
STUBE200 - 900 m3/h
STUBE250 - 1000 m3/h

STUBE315 - 1500 m3/hr


Noise Level

 NOISE LEVEL 49 dBA @ 3m - STUBE100
NOISE LEVEL 49dBA @ 3m - STUBE125
NOISE LEVEL 49 dBA @ 3m - STUBE150
NOISE LEVEL 51dBA @ 3m - STUBE200
NOISE LEVEL 52 dBA @ 3m - STUBE250

NOISE LEVEL 53 dBA @ 3m - STUBE315

 

 

4
translation missing: en.products.product.regular_price £29.99
translation missing: en.products.product.regular_price £29.99

Inline fan with plug SIUK100

 

In this Kit you will receive

 

SIUK100 (4" fan with EU plug + UK adaptor / 100m3/hr)

1 x 1m PVC Ducting

1 x 1m ALU Tape

1 x 4" Carbon Filter

 

100m3/hr Inlet side will fit on to Carbon filter or Grille Spigot

 

 

Exhaust side will fit into ducting 

 

 

 

exhaust or Supply ventilation of bathroom, showers, kitchens and other.

 

 

 

Designed for PVC duct systems or flexible ducts. 


The case and the impeller are made of high-quality durable ABS plastic,this is not affected by UV

.

Slider bearings motor equipped overheating protection.

 

 


Different inlet & exhaust flange diameter

 

 

 

Inlet side will fit on to Carbon filter or Grille Spigot

Exhaust side will fit into ducting 

 

4
£39.99

Swiftair - SF Inline fan

Kit will include the following depending on selection: 

4" 100mm Kit: SF100S - UK Plug - 5m Alu Duct - Carbon Filter 4" - 3 x Clamps
5" 125mm Kit: SF125S - UK Plug - 5m Alu Duct - Carbon Filter 5" - 3 x Clamps
6" 150mm Kit: SF150S - UK Plug - 5m Alu Duct - Carbon Filter 6" - 3 x Clamps

Carbon Filter Details
4" carbon filter - 4" x 250mm
5" carbon filter - 5" x 400mm
6" carbon filter - 6" x 500mm

Fan Details (M3/hr at free air)
SF100S - On/Off - 100 m3/h
SF125S - On/Off - 150 m3/h

SF150S - On/Off - 210 m3/h

QBF Low Noise Silent Hydroponics Acoustic Box Fan upto 2150m3/hr 4 5 6 8 10 12
£89.99

Quiet Box Fan (QBF) fan design allows for supply and extract ventilation for areas/rooms with high requirements to low noise levels and limited mounting space. 

Units can be installed above ceilings or in loft spaces. Suitable for connection with 100 (4"), 125 (5"), 150 (6"), 200 (8"), 250 (10") and 315 (12") mm round ducts.

 

Sound level and Fan Volume

 

100mm - 240m3/hr - 33 dBA

 

125mm - 330m3/hr - 35 dBA

 

150mm - 420m3/hr - 36 dBA

 

200mm - 730m3/hr - 38 dBA

 

250mm - 1300m3/hr - 41 dBA

 

315mm - 2150m3/hr - 43 dBA

 

Design

 

The fan casing is made of galvanized steel sheet and provided with heat- and sound-insulating material.

 

Motor

 

The centrifugal impeller with back-curved blades is powered by means of 2-pole asynchronous motor with external rotor. The motors are equipped with built-in thermal overheating protection with automatic restart. Motor ball bearings with selective lubricating oil ensure low-noise and maintenance-free operation.

 

 

 

Duct Jubilee Clip Clamp
£5.49

 

To Options available please select from drop down menu

60mm - 160mm (3" to 6"")

60mm - 325mm (3" to 12")

Duct worm drive clips have been specifically designed for fixing flexible ducting to solid ducting, extractor fan spigots, duct fittings and air terminal devices.

The unique one-piece locking mechanism with tilting head provides very fast clamping by hand - only final tightening by screw or hex head driver is necessary to complete a perfectly airtight joint.

Please select your size from the drop down menu above.


METAL Ducting Back Draught Connector Flexible Hydroponics 4
£5.99

 

 

Please Select which size you need above

4" 100mm, 5" 125mm, 150mm 6", 200mm 8", 250mm 10" & 315mm 12"

Male ducting back draught connector for solid or Flexible ducting 

Please note these back draught shutters require a very strong fan the pressure from this back draught shutter is around 80 to 110pa

Made from Metal

** There is NO additional postage charge for multiple purchases **

Complete Hydroponic Grow Room Tent Fan Filter HPS Light Kit 250 watt 80x80x180
£134.99

Complete Tent Kit 0.8 x 0.8 x 1.8m

 

 

 

In this kit you will get the following item:

 

Ballast 250w ---- 250w Bulb Dual Spectrum ---- Reflector

 

Tent - 0.8m2

 

Swiftair Inline fan kit - Centrifugal fan, Carbon Filter, Alu Ducting, Clamps

 

Yo Yo Hanger (Pair)

 

Please see below for description on products:

 

 

 

The 250w Ballast, has been designed for improved quality and high output,

 

Metal Case

 

Fitted with IEC connector cord and UK mains lead

 

This produces the full light spectrum with added blue for the propagation and vegging stages. We recommend you replace lamps every 3-6 months to avoid diminishing harvests.

 

Lamp size and output

 

250 watt - 30,000 Lumens

 

Please keep the retail packaging in case you need to return it to us. Bulbs sent without the original packaging are not covered by warrant

 

 

 

SUPERB VALUE HYDROPONIC TENT

 

Quality Hydroponic Grow Room Tents

 

 

 

95 % reflective hammered silver lining

 

Heavy duty zips

 

Metal poles (please make sure these a pushed all the way in on the side clip provided)

 

5 x 150mm Air holes (2 Left, 2 Right & 1 on Top)

 

1 x 80mm hole

 

Passive ventilation windows: 2

 

(we found the easiest way to put up is fix bottom half first then top part and start from the back)

 

PowerPlant Heavy Duty Timer - Please select if needed

 

 

 

Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on.

 

The PowerPlant Heavy Duty Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast.

 

This means no separate contactor is required and saves you money. It has a 96 switching operations within a 24 hour period (every 15 minues).

 

 

 

This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers. This unit is ideal for timing 400w and 600w ballasts. Do not use more than one 600w ballast per timer.

4
translation missing: en.products.product.regular_price £24.99
translation missing: en.products.product.regular_price £24.99

 


Swiftair - Inline Hydroponics Fan
ST100 fans are applied for supply and exhaust ventilation systems of commercial, office and other premises. Compatible with Ø100mm round air ducts. 
Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

Note: Please remove back draught shutter as it will make a lot of noise (However if you are ok with that then please use)

The impeller with backward curved blades is powered by a single-phase asynchronous AC motor with external rotor including the following features: 
A dynamic balanced impeller with backward curved blades balanced in two planes.
Overheating protection with automatic restart.
Maintenance-free ball-bearings used with motors and designed for at least 40 000 hours operation. 
Motor protection rating IP X4

Instalation to the wall or ceiling can be performed by means of mounting brackets (included in the delivery). The fan can be mounted at any angle. Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box (Wire an plug supplied plug straight in and turn on)

If you do not wish to use the plug please wire directly into terminal

 

4
£29.99 Sold Out

Please select size above

 

 

 

4” 100mm

 

 

 

 


Fans are applied for supply and exhaust ventilation systems of commercial, office and other premises.

 

 

 

 

 

 

 

Compatible with Ø 100mm round air ducts.

 

 

 

 


These fans have a plastic casing, Because of the casing they are the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

 

 

 

 


The impeller with backward curved blades is powered by a single-phase asynchronous AC motor with external rotor including the following features: 
A dynamic balanced impeller with backward curved blades balanced in two planes.
Overheating protection with automatic restart.

 

 

 

 


Maintenance-free ball-bearings used with motors and designed for at least 40 000 hours operation.

 

 

 

 


Motor protection rating IPX4

 

 

 

 

 

 

 

The fan can be mounted at any angle.

 

 

 

 


Electric connection and installation shall be performed in compliance with the manual and the wiring diagram on the terminal box

 

 

 

 

 

 

 

Airflow
 265 m3/hr

 

 

 

 





 

 

 

Power W
52w

 

 

 

 


Noise Level

 

 

 

 

NOISE LEVEL 52 dBA

 

RVF Inline Centrifugal Fan
£69.99

PLEASE SELECT SIZE AND VOLUME FROM DROP DOWN MENU

All Orders Are Sent In Plain Boxes or Bags
RVK Fans are manufactured in Germany, built to last these fans will help in the removal of hot stale air from your grow room and can also be used to provide fresh air ventilation for larger rooms. Systemair RVK inline fans are the most silent, reliable and best fans for moving large volumes of air in growrooms or greenhouses.
The RVK series is designed for installation in ducts. The casing is manufactured from PA6 fibreglass reinforced plastic which gives the fan a less leckage casing. 
Duct connected wet room applications of the fan are possible due to the air tight casing and the IP 44 rated terminal box.The fans have backward-curved blades and external rotor motors. 
The FK mounting clamp facilitates easy installation and removal, and prevents the transfer of vibration to the duct. 
The fans can be speed-controlled via a stepless thyristor or a 5-step transformer. (not included)
To protect the motor from overheating RVK 100E2-A1 and 125E2-A1 have integrated thermal contacts with automatic reset. 
The models RVK 125E2-L1 up to RVK 315 have thermal contacts with manual reset. 
Please note as these fans are built to an industrial standard they DO NOT come wired

Speed-controllable
Integral thermal contacts acc. EN 60335-2-80
Can be installed in any position
Inclusive mounting bracket
Maintenance-free and reliable

RVK Sileo 100E2 Fan - 175m³/hr
RVK Sileo 125E2 Fan - 220m³/hr
RVK Sileo 125E2-L Fan - 325m³/hr
RVK Sileo 150E2 Fan - 400m³/hr
RVK Sileo 150E2-L Fan - 700m³/hr
RVK Sileo 200E2 Fan - 700m³/hr
RVK Sileo 200E2-L Fan - 950m³/hr
RVK Sileo 250E2 Fan - 790m³/hr
RVK Sileo 250E2-L Fan - 1000m³/hr
RVK Sileo 315E2 Fan - 1300m³/hr
Hydroponics Cooling Pedestal fan
£26.99

RAM 16” Pedestal Fan

 

This oscillating RAM Pedestal Fan is reliable and quiet. The base of this fan provides a solid, sturdy support.

 

It has an adjustable 400 mm (16 ”) head with a finger safe mesh grill. It has three-speed settings and the height of the fan can easily be adjusted.

 

The RAM 450mm Heavy Duty Pedestal Fan (18”) is a sturdy and reliable fan perfect for a larger grow room. The fan offers great power output meaning it can cool down and grow room quickly, for when you need a fast cooling effect.

 

 RAM 18” Heavy Duty Pedestal Fan

 

Quiet operation means less noise in your grow room

Large 450mm (18”) head

Adjustable height

Finger safe mesh grill

4-speed settings

Optional oscillating settings

Large metal blades

Solid base

Adjustable fan head tilt

 

Technical Specifications:

Size: 450mm (18”)

Power: 140 W

Voltage: 220-240 V AC, 50 Hz

Speed: 4 fan settings

 

Thermal Acoustic Duct Wrap Insulation Ventilation Duct Pipe Tube Hydroponics
£49.99

Duct wrap is a thermal insulated product, fibre glass mineral wool bonded to a strong aluminium layer.

Thermal and acoustic insulated, primarily used for metal ducts it is a versatile product with many applications

 

Euroclass A Fire Rating

 

Class O Compliance


Construction

Fibre Glass Mineral Wool, Alu,imium Facing


Thickness

25mm or 50mm


Length

9000mm (9m) to 18000mm (18m)


Fire rating

EUROCLASS A

Ventilation Duct Pipe T Tee Piece Ducting Fans Connector Joiner 3 Way Spliter
£6.99

Plastic Tee Piece

This Plastic T Piece is perfect for splitting ducting and is light but durable.

Easy to fit

Made from Plastic 

Come in sizes 4" 100mm , 5" 125mm or 6" 150mm

Hydroponic Grow Room Fan
£18.99

Axial fans are small, versatile and very adaptable making them perfect for Tents etc 

Very good for using with carbon filters and ducting 

100, 125 & 150mm Diameter sizes available.

Ideal for short duct runs up to 3 meters.

** UK plug & lead included! **
**(Please note that this is supplied loose and will needed to be wired to fan)**

PLEASE CHOOSE YOUR SIZE FROM THE DROP DOWN BOX ABOVE

4" hydroponic axial air fan
100 m3/Hour

5" hydroponic axial air input fan
150 m3/Hour

6" hydroponic axial air fan
210 m3/Hour

4 5 6 8 inch RAM Inline Mixed Flow UK Plug Hydroponics Grow Fan upto 840m3/hr
£36.99 Sold Out

Please select size above 4” 5” 6” & 8" 
RAM Mix-Flow Inline Fan
RAM is a high quality professional brand of air control products specialising in high performance and in the case of fans, low noise and long life.
The RAM Inline fans offer innovation and performance at a great price.

With a full line of fans to meet your needs,

Fitted with an IEC Socket
2m IEC lead supplied with Unit
On/Off Switch on Unit
quiet operation,
high output,
durable plastic housing designed for acoustic dampening,
CE/ROHS recognized components,
high quality molded impeller,
thermally protected AC motor

Airflow

4" - upto 199 m3/h
5" - upto 225 m3/h
6" - upto 517 m3/h

 

8" - upto 840 m3/h

300mm Eco Fan 12
translation missing: en.products.product.regular_price £21.99
translation missing: en.products.product.regular_price £21.99


A compact fan ideal for the space conscious grower for use in grow rooms, grow tents or as a cooling fan in any room

The 300mm Eco Fan features:  

3 speeds, timer.

 

Diameter: 30 cm.

 

Power: 40W.

The Box fan is very useful in small spaces, since it has a diameter of 30 centimeters and a rotating grid, which distributes the air without having to move it.

4 5 6 8 10 12
£114.99

Quiet Box Fan (QBF) fan design allows for supply and extract ventilation for areas/rooms with high requirements to low noise levels and limited mounting space. 

Temperature Controller is included 

Units can be installed above ceilings or in loft spaces. Suitable for connection with 100 (4"), 125 (5"), 150 (6"), 200 (8"), 250 (10") and 315 (12") mm round ducts.

 

Sound level and Fan Volume

 

100mm - 240m3/hr - 33 dBA

 

125mm - 330m3/hr - 35 dBA

 

150mm - 420m3/hr - 36 dBA

 

200mm - 730m3/hr - 38 dBA

 

250mm - 1300m3/hr - 41 dBA

 

315mm - 2150m3/hr - 43 dBA

 

Design

 

The fan casing is made of galvanized steel sheet and provided with heat- and sound-insulating material.

 

Motor

 

 

The centrifugal impeller with back-curved blades is powered by means of 2-pole asynchronous motor with external rotor. The motors are equipped with built-in thermal overheating protection with automatic restart. Motor ball bearings with selective lubricating oil ensure low-noise and maintenance-free operation.

 

 

4
£44.99

Soundproof wooden box

Boxes for soundproofing inline fans 

Although some fans are quiet sometimes even the noise caused by them can be annoying.

These boxes are sold disassembled and prepared to house the fan corresponding to its diameter. Inside it has special foam that dampens the noise, making the extractor silent.

- Soundproofed wooden box

- Material: DM (plywood)

- Dense foam noise-absorbing element

Please see eBay shop if you require a GEKKO or QBF box fan complete with fan inside 

 

 

SMS Fan Hydroponics Controller
£15.99

Single Socket Controller

The SMSCOM MK2 Smart Fan Speed Controller really is a smart piece of kit for automatically controlling the running speed of just one fan or with an extension lead multiple fans, to maintain your grow room at the temperature you require.

If using Multiple Fans please do not Exceed 6.5A

The SMS Smart Fan Speed Controller has built in software that constantly reads the temperature from the probe and then adjusts the running speed of the fan to suit, either faster to cool the room down or slower to heat it up.

The SMS Smart Controller is a plug and play unit that involves no wiring, simply plug in your fan and set your desired temperature and then let this smart controller do the rest.

If you use a grow tent with just one fan for extraction and fresh air passively pulled in, the SMS Smart Fan Speed Controller is the ideal partner to automatically maintain the ideal running speed for your extraction fan.

5 year Warranty - Software controlled - Smooth fan speed adjustment - Optimise grow room temperature - Constant air flow - Plug and play – no wiring necessary - 2m Temperature Sensor (Optional) - Minimum fan speed can be adjusted

Accurate to +/- 1 degree - MAX Load 6.5A

 

Twin Controller - 4.5 or 7amps

Control your temperature with the speed of your fans – all you need is an SMSCom controller.

Your intake and extractor fans will speed up if your room needs cooling, or slow down if it needs heating (temperature sensor included).

Don’t worry about air exchange – you can set minimum and maximum fan speeds.

It’s easy to set up! No hard wiring’s needed. Just plug your fans in, then set your target temperature, min speed & max speed using the 3 dials.

If you need a longer power cable, you can quickly plug it into your controller's IEC socket (like what lots of kettles have!). 

For safety, each controller has a replaceable fuse. 

Overall, your controller can handle a total 4.5 Amps to 7 amps depending on the controller selected. 

• Tidy, small & easy to use

• No hard wiring needed

• Save energy – fan speed slows when you need it to

• Easy to connect - plug and play!

• Simple to program (via 3 dials)

• Power cable included (90cm)

• Temperature sensor included

• Min speed: ensure there’s adequate air exchange

• Max speed: ideal for oversized fans

• Handles 4.5 Amps in total

• Protective, replaceable 4.5 Amp fuse

• IEC power cable connection

• Features 2 x 3 pin UK plug sockets

 

RAM EC Silenced Fan
£232.99

The Silenced Fan offers-

 

 

 

Comes with an IEC lead

 

A multi-phase EC fan motor

 

50 mm of insulating rockwool

 

Soft-start circularity resulting in less wear and tear

 

Lightweight aluminium casing

 

White powder coating for durability/heat reflection

 

Superior, self-lubricating bearings

 

Supplied with an independent fan speed controller unit to control your air flow

 

 

 

150W

 

Voltage: 110-240V

 

Watts: 40W

 

Air Flow: 531 CMH

 

Frequency: 50 HZ

 

Noise: 58dB

 

200W

 

Voltage: 110-240V

 

Watts: 70/75W

 

Air Flow: 1078 CMH

 

Frequency: 50 HZ

 

Noise: 58.3dB

 

250W

 

Voltage: 110-240V

 

Watts: 135/142W

 

Air Flow: 1617 CMH

 

Frequency: 50 HZ

 

Noise: 63.7dB