Ballast

The new 400w, has been redesigned for improved quality and high output, and continues to boast a fully enclosed and potted case.

LUMii Sunblaster

At different times in the growing cycle, plants require different types of light radiation. Immature plants have different needs to those about to mature.

To maximise the potential of a plant and ensure that it grows strong and healthy, you need to deliver just the right kind of light radiation. These bulbs have been enhanced to produce the perfect balance of blue and red light and benefit your plants at crucial stages in their development.

The SunBlaster Dual Spectrum lamp is scientifically designed and developed for the complete lifecycle of a plant. This produces the full light spectrum with added blue for the propagation and vegging stages.

Although these lamps are produced to an extremely high standard, the performance will drop off over time. We recommend you replace lamps every 3-6 months to avoid diminishing harvests.

Lamp size and output

SunBlaster 400 watt - 56,000 Lumens

Please keep the retail packaging in case you need to return it to us. Bulbs sent without the original packaging are not covered by warrant

LIGHTHOUSE Tent

The LightHouse LITE 1m² Tent has extraction through the roof with a 250mm (10") sock and 2 x inline 250mm (10") socks for use with air-cooled lighting. There are also 3 x low level passive air vents with fine (anti-mite) mesh and it also includes light proof covers for when they are not in use. It is for a single lamp set up (400w HID)

PowerPlant Heavy Duty Timer - Please select if needed

Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on.

The PowerPlant Heavy Duty Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast.

This means no separate contactor is required and saves you money. It has a 96 switching operations within a 24 hour period (every 15 minues).

This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers. This unit is ideal for timing 400w and 600w ballasts. Do not use more than one 600w ballast per timer.

Fan Kit

FAN, ALUMINIUM DUCTING, CARBON FILTER

Air Flow

Mixedflow fan - 220 m3/h

Carbon Filter Size

To get the most out of your kit, please follow these few tips:

Remember, if you reverse-mount your Filter you will lose the benefit of your pre-filter and reduce the life of the carbon.

Always mount your filter as high as possible. Hot air naturally rises and so will your odours!

Try not to block too much of the filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter.

Do Not mount your Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours!

Ensure you have an airtight seal around the connection of your filter to ducting or extractor fan.