Small Grow Room Tent Filter HPS 600W Kit 80x80x180

Small Grow Room Tent Filter HPS 600W Kit 80x80x180
Regular price £144.99

Yo Yo Hanger (Pair)

 

Please see below for description on products:

 

The 600w Ballast, has been designed for improved quality and high output,

 

Metal Case

 

Fitted with IEC connector cord and UK mains lead

 

This produces the full light spectrum with added blue for the propagation and vegging stages. We recommend you replace lamps every 3-6 months to avoid diminishing harvests.

 

Lamp size and output

 

600 watt - 90,000 Lumens

 

Please keep the retail packaging in case you need to return it to us. Bulbs sent without the original packaging are not covered by warrant

 

SUPERB VALUE HYDROPONIC TENT

 

Quality Hydroponic Grow Room Tents

 

95 % reflective hammered silver lining

 

Heavy duty zips

 

Metal poles (please make sure these a pushed all the way in on the side clip provided)

 

5 x 150mm Air holes (2 Left, 2 Right & 1 on Top)

 

1 x 80mm hole

 

Passive ventilation windows: 2

 

(we found the easiest way to put up is fix bottom half first then top part and start from the back)

 

PowerPlant Heavy Duty Timer - Please select if needed

 

Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on.

 

The PowerPlant Heavy Duty Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast.

 

This means no separate contactor is required and saves you money. It has a 96 switching operations within a 24 hour period (every 15 minues).

 

This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers. This unit is ideal for timing 400w and 600w ballasts. Do not use more than one 600w ballast per timer.

 

Fan Kit

 

FAN, ALUMINIUM DUCTING, CARBON FILTER, CLAMPS X 3

 

Air Flow

 

Centrifugal fan - 110 m3/h - comes with stand attached to screw to floor (can not see in picture)

 

Carbon Filter Size

 

To get the most out of your kit, please follow these few tips:

 

Remember, if you reverse-mount your Filter you will lose the benefit of your pre-filter and reduce the life of the carbon.

 

Always mount your filter as high as possible. Hot air naturally rises and so will your odours!

 

Try not to block too much of the filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter.

 

Do Not mount your Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours!

 

 

 

Ensure you have an airtight seal around the connection of your filter to ducting or extractor fan.

  • guaranteeQuality checked
  • Free ShippingStandard Delivery
  •                       
                          

Yo Yo Hanger (Pair)

 

Please see below for description on products:

 

The 600w Ballast, has been designed for improved quality and high output,

 

Metal Case

 

Fitted with IEC connector cord and UK mains lead

 

This produces the full light spectrum with added blue for the propagation and vegging stages. We recommend you replace lamps every 3-6 months to avoid diminishing harvests.

 

Lamp size and output

 

600 watt - 90,000 Lumens

 

Please keep the retail packaging in case you need to return it to us. Bulbs sent without the original packaging are not covered by warrant

 

SUPERB VALUE HYDROPONIC TENT

 

Quality Hydroponic Grow Room Tents

 

95 % reflective hammered silver lining

 

Heavy duty zips

 

Metal poles (please make sure these a pushed all the way in on the side clip provided)

 

5 x 150mm Air holes (2 Left, 2 Right & 1 on Top)

 

1 x 80mm hole

 

Passive ventilation windows: 2

 

(we found the easiest way to put up is fix bottom half first then top part and start from the back)

 

PowerPlant Heavy Duty Timer - Please select if needed

 

Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on.

 

The PowerPlant Heavy Duty Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast.

 

This means no separate contactor is required and saves you money. It has a 96 switching operations within a 24 hour period (every 15 minues).

 

This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers. This unit is ideal for timing 400w and 600w ballasts. Do not use more than one 600w ballast per timer.

 

Fan Kit

 

FAN, ALUMINIUM DUCTING, CARBON FILTER, CLAMPS X 3

 

Air Flow

 

Centrifugal fan - 110 m3/h - comes with stand attached to screw to floor (can not see in picture)

 

Carbon Filter Size

 

To get the most out of your kit, please follow these few tips:

 

Remember, if you reverse-mount your Filter you will lose the benefit of your pre-filter and reduce the life of the carbon.

 

Always mount your filter as high as possible. Hot air naturally rises and so will your odours!

 

Try not to block too much of the filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter.

 

Do Not mount your Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours!

 

 

 

Ensure you have an airtight seal around the connection of your filter to ducting or extractor fan.

Delivery:

Dispatch cut off point 12:00pm

(if you order after this time you item will be dispatched the following working day)

Free carriage only apply's to the below if we can use royal mail if the item is to large we will call to discuss as there is other options available.

Postcodes Highlands: FK17-22, G83, IV1-28, IV33-39, KW1-3, KW5-14, PA21-33, PA35-40, PH18-26, PH30-42, AB44-56, IV30-32
Islands: HS1-9, IV40-51,IV55-56,KA27,KA28,KW15-17,PA20,PA34,PA41-48,PA60-78,PH42-44,ZE1-3, JE, GY, IM, TR21-25 (ALL ISLANDS APPLY)
Northen Ireland: BT

Login