Swiftair Temperature Twin Climate Controller
Regular price
£54.99
No reviews
- guaranteeQuality checked
- Free ShippingStandard Delivery
Swiftair Twin Speed Thermostatic Controller
The Speed Controller has two power outlets, one for intake and one for exhaust.
Each of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.
KEY FEATURES
- Intake socket - Power supply for fresh air intake fan.
- Exhaust socket - Power supply for stale air extraction fan.
- Idle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)
- Balance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.
- Temperature control knob - This control is used to set the desired temperature from 5°C - 45°C.
- Numerical display - Shows the target temperature.
- LED indicator - Visible when effectively maintaining and controlling the temperature.
- Temperature sensor - Monitors the environment.
- Reset - This is a simple circuit breaker that will protect the controller if it ever overloaded.
Set Up and Usage
Place the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.
Set your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.
Delivery:
Dispatch cut off point 12:00pm
(if you order after this time you item will be dispatched the following working day)
Free carriage only apply's to the below if we can use royal mail if the item is to large we will call to discuss as there is other options available.
Postcodes Highlands: FK17-22, G83, IV1-28, IV33-39, KW1-3, KW5-14, PA21-33, PA35-40, PH18-26, PH30-42, AB44-56, IV30-32
Islands: HS1-9, IV40-51,IV55-56,KA27,KA28,KW15-17,PA20,PA34,PA41-48,PA60-78,PH42-44,ZE1-3, JE, GY, IM, TR21-25 (ALL ISLANDS APPLY)
Northen Ireland: BT
Other Customers also buy:
-
![Perlite 5 to 100 Litres]()
-
{"id":6115594764442,"title":"Swiftair Temperature Twin Climate Controller","handle":"swiftair-temperature-twin-hydroponics-fan-speed-controller-fan-speed-climate","description":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e","published_at":"2021-01-28T15:42:08+00:00","created_at":"2021-01-28T15:42:10+00:00","vendor":"Swiftair","type":"Garden \u0026 Patio:Hydroponics:Other Hydroponics","tags":["All Products","Electrical \u0026 Accessories","Environment Control","Ventilation \u0026 Extraction"],"price":5499,"price_min":5499,"price_max":5499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37747898482842,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SW-TEMPTWIN-CON","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Swiftair Temperature Twin Climate Controller","public_title":null,"options":["Default Title"],"price":5499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"Does not apply","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","options":["Title"],"media":[{"alt":null,"id":13385572974746,"position":1,"preview_image":{"aspect_ratio":1.152,"height":1389,"width":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"},"aspect_ratio":1.152,"height":1389,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e"}
-
![Secret Jardin Webit Plant Support Scrog Net Grow Tent 60 90 120 150 240 300]()
-
{"id":6115594764442,"title":"Swiftair Temperature Twin Climate Controller","handle":"swiftair-temperature-twin-hydroponics-fan-speed-controller-fan-speed-climate","description":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e","published_at":"2021-01-28T15:42:08+00:00","created_at":"2021-01-28T15:42:10+00:00","vendor":"Swiftair","type":"Garden \u0026 Patio:Hydroponics:Other Hydroponics","tags":["All Products","Electrical \u0026 Accessories","Environment Control","Ventilation \u0026 Extraction"],"price":5499,"price_min":5499,"price_max":5499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37747898482842,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SW-TEMPTWIN-CON","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Swiftair Temperature Twin Climate Controller","public_title":null,"options":["Default Title"],"price":5499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"Does not apply","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","options":["Title"],"media":[{"alt":null,"id":13385572974746,"position":1,"preview_image":{"aspect_ratio":1.152,"height":1389,"width":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"},"aspect_ratio":1.152,"height":1389,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e"}
-
![CANNA BOOST ACCELERATOR FLOWER ENHANCER STIMULATOR HYDROPONICS SOIL 250ml 1 5L]()
-
{"id":6115594764442,"title":"Swiftair Temperature Twin Climate Controller","handle":"swiftair-temperature-twin-hydroponics-fan-speed-controller-fan-speed-climate","description":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e","published_at":"2021-01-28T15:42:08+00:00","created_at":"2021-01-28T15:42:10+00:00","vendor":"Swiftair","type":"Garden \u0026 Patio:Hydroponics:Other Hydroponics","tags":["All Products","Electrical \u0026 Accessories","Environment Control","Ventilation \u0026 Extraction"],"price":5499,"price_min":5499,"price_max":5499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37747898482842,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SW-TEMPTWIN-CON","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Swiftair Temperature Twin Climate Controller","public_title":null,"options":["Default Title"],"price":5499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"Does not apply","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","options":["Title"],"media":[{"alt":null,"id":13385572974746,"position":1,"preview_image":{"aspect_ratio":1.152,"height":1389,"width":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"},"aspect_ratio":1.152,"height":1389,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e"}
-
![Plant Magic Soil Supreme or CoCo Coir]()
-
{"id":6115594764442,"title":"Swiftair Temperature Twin Climate Controller","handle":"swiftair-temperature-twin-hydroponics-fan-speed-controller-fan-speed-climate","description":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e","published_at":"2021-01-28T15:42:08+00:00","created_at":"2021-01-28T15:42:10+00:00","vendor":"Swiftair","type":"Garden \u0026 Patio:Hydroponics:Other Hydroponics","tags":["All Products","Electrical \u0026 Accessories","Environment Control","Ventilation \u0026 Extraction"],"price":5499,"price_min":5499,"price_max":5499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37747898482842,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SW-TEMPTWIN-CON","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Swiftair Temperature Twin Climate Controller","public_title":null,"options":["Default Title"],"price":5499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"Does not apply","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","options":["Title"],"media":[{"alt":null,"id":13385572974746,"position":1,"preview_image":{"aspect_ratio":1.152,"height":1389,"width":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"},"aspect_ratio":1.152,"height":1389,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e"}
-
![4" Carbon FIlter Tent Extraction Kit Hydroponics]()
-
{"id":6115594764442,"title":"Swiftair Temperature Twin Climate Controller","handle":"swiftair-temperature-twin-hydroponics-fan-speed-controller-fan-speed-climate","description":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e","published_at":"2021-01-28T15:42:08+00:00","created_at":"2021-01-28T15:42:10+00:00","vendor":"Swiftair","type":"Garden \u0026 Patio:Hydroponics:Other Hydroponics","tags":["All Products","Electrical \u0026 Accessories","Environment Control","Ventilation \u0026 Extraction"],"price":5499,"price_min":5499,"price_max":5499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37747898482842,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SW-TEMPTWIN-CON","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Swiftair Temperature Twin Climate Controller","public_title":null,"options":["Default Title"],"price":5499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"Does not apply","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","options":["Title"],"media":[{"alt":null,"id":13385572974746,"position":1,"preview_image":{"aspect_ratio":1.152,"height":1389,"width":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"},"aspect_ratio":1.152,"height":1389,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e"}
No reviewstranslation missing: en.products.product.regular_price £44.99 -
![Canna CoCo Nutrients]()
-
{"id":6115594764442,"title":"Swiftair Temperature Twin Climate Controller","handle":"swiftair-temperature-twin-hydroponics-fan-speed-controller-fan-speed-climate","description":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e","published_at":"2021-01-28T15:42:08+00:00","created_at":"2021-01-28T15:42:10+00:00","vendor":"Swiftair","type":"Garden \u0026 Patio:Hydroponics:Other Hydroponics","tags":["All Products","Electrical \u0026 Accessories","Environment Control","Ventilation \u0026 Extraction"],"price":5499,"price_min":5499,"price_max":5499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37747898482842,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SW-TEMPTWIN-CON","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Swiftair Temperature Twin Climate Controller","public_title":null,"options":["Default Title"],"price":5499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"Does not apply","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","options":["Title"],"media":[{"alt":null,"id":13385572974746,"position":1,"preview_image":{"aspect_ratio":1.152,"height":1389,"width":1600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530"},"aspect_ratio":1.152,"height":1389,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/6588\/1413\/products\/57_1d787837-5ac0-4a5f-9c62-345fe8979172.jpg?v=1611848530","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif\u003eSwiftair Twin Speed Thermostatic Controller\u003c\/h2\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eThe Speed Controller has two power outlets, one for intake and one for exhaust.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003eEach of the two power outlets can control fans up to a maximum power of 5amps, both speeds of the intake and exhaust fans are adjustable to maintain the ideal temperature.\u003c\/p\u003e\u003cp data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\" style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIntake socket - Power supply for fresh air intake fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eExhaust socket - Power supply for stale air extraction fan.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eIdle speed control knob - This sets the minimum speed both fans will attain when the temperature is below the pre-set and is adjustable between 20% and 60%. (We advise not taking AC Fans below 40%)\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eBalance control knob - This adjusts the differential between the intake and exhaust fan in order to obtain correct balance when using similarly sized fans.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature control knob - This control is used to set the desired temperature from 5°C - 45°C.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eNumerical display - Shows the target temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eLED indicator - Visible when effectively maintaining and controlling the temperature.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eTemperature sensor - Monitors the environment.\u003c\/li\u003e\n\u003cli data-sanitized-data-mce-fragment=\"1\" data-mce-fragment=\"1\"\u003eReset - This is a simple circuit breaker that will protect the controller if it ever overloaded.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e\u003cstrong\u003eSet Up and Usage\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003ePlace the twin fan control onto a stable surface and plug your extractor fan into the exhaust socket and the intake fan into the intake socket, the controller is better suited outside the growing environment if possible. Place the temperature sensor within your growing environment where it is out of direct light and has good airflow.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif white font-size:=\"\" background:=\"\"\u003e\u003cbr\u003eSet your desired temperature using a temperature control knob, the idle speed of both fans will also need to be selected using the speed knob, the idle speed knob controls the minimum speed that the fans will go down to when the temperature within the growing environment is under the user set figure you can select this setting between 20% and 60% but 40% minimum is recommended, once this has been set you'll be able to set a differential between the intake and the exhaust fans if necessary. When the adjusting the balance control knob you can sustain a negative pressure within your environment.\u003c\/p\u003e\u003cp style=\"margin: 0px 0px 1em; line-height: 1.4; color: rgb(33, 43, 54); font-family: -apple-system, BlinkMacSystemFont, \" san=\"\" francisco ui roboto neue sans-serif font-size:=\"\"\u003e \u003c\/p\u003e"}
