Propagation
Sunblaster T5 lamps - Bright, cool & super-efficient
Available in 5 sizes:
11w - 30cm
17w - 45cm
24w - 60cm
39w - 90cm
54w - 120cm
These lamps typically last for 10,000 hours
The future’s bright and cool thanks to Sunblaster NanoTechnology
The SunBlaster T5 produces more light, with less energy input, and less heat output than other lamps thanks to its NanoTech-enhanced reflector.
The Sunblaster's reflector captures and reflects 99.9% of previouly lost light and increases lumen availability by 300%. It also diffuses light deeper into the plant foliage and uses 50% less energy than standard fluorescent lamps.
The Sunblaster T5 produces so little heat that it can be placed 1" to 2" above the plant canopy which maximises photosynthetic response.
The SunBlaster T5, with its NanoTech reflector diffuses light deeper into the plant foliage and uses 50% less energy than standard fluorescent lamps.
So little heat is produced that the lights can be placed 1" to 2" above the plant canopy which maximizes photosynthetic response.
What is NanoTechnology?
NanoTechnology is a manufacturing process of extreme precision measured on the nanoscale.
The SunBlaster reflector was made by working within tolerances of between one and 100 nanometers. A single sheet of paper is 100,000 nanometers thick!
NanoTech reflector explained
The NanoTech metallic crystal in the reflector absorbs, reflects, corrects and shatters the light which then exits the reflector as diffused light.
This diffused light has a wider spread and penetrates deeper into the plant foliage.
The NanoTech crystal layer is enhanced with 2 layers of optical grade reflective film and a protective external layer.
Sunblaster T5 lamps recreate the natural light spectrum your plants need, allowing them to grow bigger, healthier and faster.
Integrated Reflector
SunBlaster is the only T5 with a patented NanoTech-enhanced reflector, exclusively from NutricultureDGS.
These T5HO lamps come complete with a revolutionary nanotech T5 reflector, which increases the spread of light considerably.
Full spectrum output
With a Kelvin rating of 6400K, Sunblaster T5HO lamps are the ideal light for the propagation and grow stage of the plants life.
Great Value
Average lamp life of 10,000 hours. That represents a lot of crop cycles.
They also come complete with power cable
Low temperature operation
These lamps operate at low temperature, so you don’t need to worry about them increasing the heat level in your grow room.
Integrated Reflector
These T5HO lamps come complete with a revolutionary nanotech T5 reflector, which increases the spread of light considerably.
Flexible
Connect up to 8 lights quickly and easily
Lightweight
Each Sunblaster T5 lamp weighs just 100g making them ideal for tents
For more information see: https://www.sunblasterlighting.com/grow-lighting/t5ho-with-reflector/
PLEASE SELECT YOUR ITEM ABOVE
ROOT!T® Heat Mat - Get a jump start on plantings with the ROOT!T Heat Mat!
Adding uniform heat to your plants will speed up germination by days! ROOT!T Heat Mat offers more uniform heating than others on the market with its intricate pattern of fine wire throughout its waterproof, frayproof layers delivering the durability to withstand rugged greenhouse environments.
This mat warms the rooting area to the ideal temperature required for perfect propagation, whether seed-germination or rooting cuttings. A thermostat is also available for these heat mats offering complete temperature control.
Speeds up germination/striking of cuttings by several days
Warms root area 5.5-11˚C over ambient temperature
Fully waterproof, fray proof and durable
Sizes available:
Small - 25cm x 35cm
Medium - 40cm x 60cm
Large - 40cm x 120cm
Swiftair Digital Heat Mat Thermostat
PLEASE SELECT IF NEEDED
Electronic temperature controller is compatible with all heat mats and is an optional accessory for the Heat Mats.
The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants. It has an easy plug-in operation with an illuminated indicator.
Features:
Easy to use and control
Temperature control
range 20ºC to 42ºC
Controls temperature of heat mats evenly in colder/warmer than normal environments
Provides constant optimum temp for specific plants.
Easy plug-in operation
Indicator light
Simple to use
2 YEAR WARRANTY
Jiffy 7 Peat Propagation Plugs 38mm
These best selling propagating plugs just require wetting.
Drop in the seed or cutting and place in a propagator and off it grows! Sold throughout the world, they also grow great in NFT - simply drop your new seedlings into your SureGrow Gully.
The Jiffy Peat Plugs are made of a stable structured substrate and are an environmentally friendly product that is convenient and quality assured.
PLEASE KEEP IN A DRY LOCATION
Please select which type you require above
Precision Pruner
Surgical stainless steel holds a sharper edge longer. This ergonomic design reduces stress to the hand. The high quality spring enhances speed and performance. Double density and anti-slip handles. It is available in curved and straight blade options for superior precision.
Curved Blade Pruner
The surgical stainless steel used in this pruner holds a sharper edge longer. This ergonomic design reduces stress to the hand and the high quality spring enhances speed and performance. The Precision Curved Blade Pruner has double density and anti-slip handles and is available in curved and straight blade options for superior precision.
Bonsai Shears
For right or left handed use. These Bonsai Shears have an ultra-light simplistic design and are ideal for cutting and trimming flowers with a 60mm cutting capacity.
Mini Clippers
These convenient pocket size Mini Clippers have surgical stainless steel blades that hold a sharper edge longer. For right or left handed use.
CANNA Start available in 500ml, 1 litre and 5 litre
(please select above)
CANNA Start is a balanced one-part nutrient for seedlings and (rooted) cuttings. CANNA Start can be used on various substrates like rock-wool plugs, coco pellets, jiffy plugs, seed mixes and most other propagation media, except re-circulating systems and clone machines. Propagation media are media on which you can reproduce plants.
CANNA Start gives you all the micro- and macro nutritional elements for a seedling or cutting to develop into a strong healthy plant.
With the addition of CANNA Start to the CANNA range, we offer a complete program for growing from Start to crop! With CANNA Start you can use CANNA all the way. From clone to crop!
Advantages of CANNA Start:
Only one bottle needed. CANNA Start is a complete one-part nutrient, meaning it contains all the needed elements in one bottle (no A and B versions needed)
CANNA Start links up perfectly with all other CANNA nutrients. Once cuttings are transplanted from plugs into the final medium, you switch from CANNA Start to the CANNA (Vega) nutrient suitable for the medium you're growing in (CANNA TERRA, COCO, HYDRO or AQUA) for the remainder of the cycle. It's especially great in combination with CANNA RHIZOTONIC. With this combination, your plants will get the strongest and thickest roots.
Reduces the risk of overfeeding. Cuttings and seedlings have different needs than established plants. A normal nutrient for the vegetative stage is not suitable for cuttings and seedlings because you run the risk of overfeeding.
Reduces the risk of plant material turning yellow. Diluting a vegetative nutrient to make it more suitable for cuttings and seedlings isn't the answer. Such a dilution doesn't contain enough micro and macro elements. This causes yellowing of the plant material; not a good start for your crop. To ultimately achieve strong, healthy plants at the end you have to start off right at the very beginning. That's why CANNA developed CANNA Start; to get the exact ratio of all nutritional elements, right for cuttings and seedlings.
CANNA Start is perfect for growers who:
Grow from seeds
Take their own cuttings
Put the seedlings or cuttings in small pots first, before transplanting them into the final medium
User Instructions
Shake bottle well before use
Fill nutrient reservoir with water
Dissolve 40 ml concentrate per 10 litre of water (1:250)
The EC of CANNA Start dissolved in (tap) water varies between 0.7 – 1.3 mS/cm2 (= the solution EC + the water EC)
Recommended pH: 5.2 – 6.2, depending on the substrate
Storage, health & safety and other directions
CANNA developed specialised nutrients for the stage after transplanting.
Store closed in a dark and frost-proof place (UV light breaks down iron chelates in the nutrient)
Keep out of reach of children
Warranty / Guarantee
Options:
150 Cube Tray - 25x25x40mm Cubes (small)
77 Cube Tray - 35x35x40mm Cubes (large)
Cultilène Benefits
An effective air-to-water ratio
Reliable Homogeneity
Great Strength & Dimensional Stability
Excellent Controllability
Inert and pathogen-free
Cultilène is one of the world's leading substrate producers.
They have a great reputation in the industry as a company that puts the grower
first.
The Cultilène stonewool cubes are made to fit the large hole blocks and are
supplied in an easy-to-use tray.
The cubes have an effective air-to-water ratio and a reliable homogeneity with
great strength and dimensional stability and excellent controllability.
This media is inert and pathogen free.
Growth Technology - Propagation has always been our business
Our company has been involved with propagation since the very early eighties when we produced young plants for a living.
There has never been a moment in the last twenty years when we have not had some sort of propagation trial underway and this has helped us to develop - or access - the most effective products for plant propagation from around the world.
Clonex Rooting Gel remains the pivotal product and we recommend its use with almost all plant species.
The Cultilène Cube with Large Hole is ideal for use with the larger Cultilène cubes or round Cultilène plugs.
The cubes have an effective air-to-water ratio and a reliable homogeneity with great strength and dimensional stability and excellent controllability.
This media is inert and pathogen free.
3" 80mm - 75mm x 75mm x 98mm
4" 100mm - 100mm x 100mm x 65mm
6" 150mm - 150mm x 150mm x 135mm
ROOT!T®
Rooting Sponges 50 refill bag
Maximise your success rate and grow faster, more vigorous roots with ROOT!T
Natural Rooting Sponges – the latest innovation in propagation.
Not only are they simple to use and easy to pot on. This bag of 50 sponges can
be used to refill trays or used on there own on a bed of perlite or
Vermiculite.
The bag is resealable to help ensure that each ROOT!T Natural Rooting Sponge is
kept in perfect condition.
Maximise your success rate
Faster more vigorous rooting
Organic and fully biodegradable
Simple to use and easy to pot on
No mess, no fuss, just excellent results
More about: ROOT!T Natural Rooting Sponge
This breakthrough organic technology is based on a mixture of peat and bark
bonded together with plant-derived bio-degradable polymers that allow the
product to bio-degrade once you have discarded it.
The media starts to breakdown after use and several months. Due to the
structure of the range, it retains just the right amount of water without
causing material compression resulting in explosive early root growth.
Use ROOT!T Natural Rooting Sponges for robust early rooting that supports
explosive plant growth.
Specially designed dual hole to take cutting and seed.
The top wider area is at the perfect depth for most seed, designed to a
specific width to create an ideal humid micro climate around the seed assisting
fast seed germination.
For cuttings there is a second hole which will hold the cutting firm while the
first hole will hold the perfect amount of ROOT!T Rooting Gel to aid quick root
development.
The benefits:
ROOT!T Natural Rooting Sponge Benefits
Environmentally friendly & bio-degradable
Faster more vigorous rooting & reduced plant shock
Superior absorption of nutrients & easily maintains perfect water/air ratio
Improved water retention & reduces transplant losses
Insulates roots better against heat or lack of moisture
Contains micronutrients & beneficial microbes to aid germination
Unique pre-moulded hole for cuttings and seeds
Please select above which item you require
2ft lamps are 24w (6500k) each
4ft Lamps are 54w (6500k) each
EnviroGro's T5 System delivers performance and flexibilty along with high lumen output in any growing environment.
These systems allow you to choose multiple hanging configurations to meet your garden's design.
The EnviroGro T5 System hangs three ways - overhead, vertically or horizontally.
Different options listed below
LUMii 2ft (60cm x 25cm) 2 lamp T5 Light - Switches on/off
LUMii 2ft (60cm x 41cm) 4 lamp T5 Light - Can switch tubes to Half or full / off
LUMii 4ft (122cm x 41cm) 4 lamp T5 Light - Can switch tubes to Half or full / off
LUMii 4ft (122cm x 67cm) 8 lamp T5 Light - Can switch tubes to Half or full / off
Garden soft tie is 8 meters long. It gently secures plants with padded tie that will not cut into the stems
3.5mm x 8M
Will Not Cut Into Stems !!
Compressed coir bricks available in boxes of 24 (full box).
Average weight is 650 grams per block; each block expands to approximately 8 litres when soaked in water.
ROOT!T Rooting Gel is the first rooting gel specifically formulated for use with growing media.
It is a revoloutionary product that has replaced the need for traditional hormone rooting powder and helps natural root development of cuttings.
Ready to dispay in this handy CDU.
Please select if you require Float
You can also select if replacement Ceramic Discs are needed
This powerful and compact humdifier produces water vapour via ultrasonic vibration for a very fine micron size droplet correcting the humidity of the air dried out by central heating or environmental conditions associated with indoor growing.
Each unit is cool running and gives 100% humidity.
Mist Makers maintain the optimum growing environment required for cuttings and seedlings as well as with growth through the vegetative stage of your plant cycle.
Place in a large propagator or centre of the growroom and watch the vapour float around your cuttings producing rapid growth rates and delivering greater nutrient uptake as well as nutrient transportation.
Your plant's roots will grow to love the Mist Maker!
The Mist Maker is cool running (most humidifiers on the market have a heat element).
It features a very quiet operation and requires no wiring as it plugs directly into a standard electrical plug socket.
This product uses a special coated disc for less frequent changing and works in an instant and can last up to 2000 working hours.
DK3 - has an output of 240ml per hour.
DK5 - has an output of 400ml per hour.
MIST MAKER 12 - 5300ML/HR (DK12)
ROOT!T® Propagation Kit
The kit comes complete with a medium size propagator, a 24 cell insert and tray, filled with ROOT!T Natural Rooting Sponges that offer the latest and fastest rooting available today, ROOT!T Gel4Plugs Rooting Gel sachet & ROOT!T First Feed sachet and a book on how to grow from cuttings or seeds. The ideal introduction kit to propagation!
Size: L 36cm x W 23.5cm x H 17.5cm
Maximise your success rate
Faster more vigorous rooting
Organic and fully biodegradable
Simple to use and easy to pot on
No mess, no fuss, just excellent results
What's inside?
1 x Propagator 24 cell insert with ROOT!T
Natural Rooting Sponges ROOT!T
First Feed sachet
Rooting Gel sachet
‘How to’ guide on achieving great results from your cuttings & seeds
More about: ROOT!T Natural Rooting Sponge
This breakthrough organic technology is based on a mixture of peat and bark bonded together with plant-derived bio-degradable polymers that allow the product to bio-degrade once you have discarded it.
The media starts to breakdown after use and several months. Due to the structure of the range, it retains just the right amount of water without causing material compression resulting in explosive early root growth.
Use ROOT!T Natural Rooting Sponges for robust early rooting that supports explosive plant growth.
Specially designed dual hole to take cutting and seed.
The top wider area is at the perfect depth for most seed, designed to a specific width to create an ideal humid micro climate around the seed assisting fast seed germination.
For cuttings there is a second hole which will hold the cutting firm while the first hole will hold the perfect amount of ROOT!T Rooting Gel to aid quick root development.
The benefits:
ROOT!T Natural Rooting Sponge Benefits
Environmentally friendly & bio-degradable
Faster more vigorous rooting & reduced plant shock
Superior absorption of nutrients & easily maintains perfect water/air ratio
Improved water retention & reduces transplant losses
Insulates roots better against heat or lack of moisture
Contains micronutrients & beneficial microbes to aid germination
Unique pre-moulded hole for cuttings and seeds
A humidifier is a key component to making your grow room the best environment possible. Using a humidifier, you are able to control the humidity in your grow room environment. Allowing you to reach the optimum level of humidity for your plants. The RAM Wall Humidifier is a wall mounted unit allowing for extra floor space without sacrificing your grow room environment. The easy-to-use humid-stat control dial allows for a simple control system from 20% to 100% humidity. The RAM Wall Humidifier as a stand-alone product or can be used alongside a Water Filter Kit. Users in hard water areas are particularly recommended to use a water filter with the humidifier, to protect its longevity.
Key USPs:
Prevent dryness in your growing environment
Easy-to-use dial humidistat control
Up to 1600 ml/hr output
No refills required – mains water connection (all fittings included)
Features and Benefits
Mains water connected – means a continual supply of water. As a result, there is no need to keep topping up the humidifier, leaving your machine always ready for use.
Easy to use dial humid-stat control – simple control. Allowing controlling your humidity to become a straightforward task.
Wall mounted fitting – growers can enjoy outstanding RAM quality along with efficient usage of their grow room space.
Technical Specifications
Input 220-240 V AC | 50 Hz
Power 120 W
MAX. Output 1600 ml/hr
Science behind the product
An ultrasonic humidifier uses a ceramic diaphragm vibrating at an ultrasonic frequency to create water droplets that quietly exit the humidifier in the form of cool fog/mist.
In Jurassic times ferns were huge due to very high atmospheric CO2 levels.
Modern plants have evolved from these ferns to grow with lower CO2 levels.
Spraying with CO2 fusion allows the plants leaves to reach the same level of CO2 saturation as in Jurassic times, resulting in bigger leaves and more plant available chemical energy.
CO2 fusion is a unique combination of 100% NATURAL plant growth regulators and amino acid, delivered directly to the plants leaf in readily absorbed, stabilised CO2 infused mist.
Cultilène Mapito is a stonewool substrate.
Roots thrive in this mixture which explains it popularity.
It offers the grower a good air to water ratio and excellent nutrient retention.
Mapito is a very good hydroponic grow media for GHE AquaFarm and/or WaterFarm systems.
Cultilène Mini Cubes 10mm are a cube-like loose substrate made of stonewool.
Mini Cubes provide a perfect water buffer with a very high water-holding-capacity.
The water content in a pot of Mini Cubes is at a maximum of 85%.
Not only are Mini Cubes lightweight but they also provide large air spaces as there are always open spaces amongst the cubes.
Mini Cubes maintain their cubic shape throughout cultivation.
Due to these unique features, the substrate typically has an air-space volume of 30% which depends on the size and shape of the pot.
This means that long irrigation cycles are possible without causing lack of oxygen to the roots
These peat based cubes have the ideal structure to create the right air and moisture levels and support rapid root development
Maintaining optimal growing conditions is essential for successful seed germination.
A propagator can help but careful and managed watering is also required.
This range of self watering propagators feature an internal water reservoir.
The growing trays are supported above the reservoir on raised platforms which are in turn covered in capillary matting.
The plants draw the water naturally from the capillary matting as required.
G166 - 37.5 x 13.5 x 16cm 1.2L
G165 - 37.5 x 23 x 16cm 2.2L
G179 - 37.5 x 13.5 x 16cm 1.2L (Pellets included)
G180 - 37.5 x 23 x 16cm 2.2L (Pellets included)
ROOT!T® 24 Filled Insert & Tray
This is the perfect cutting and germination product.
24 ROOT!T Natural Rooting Sponges supplied in a specially designed insert and
drip tray that can also be used as a germination lid. This ROOT!T 24 Filled
Insert & Tray offers the latest and fastest rooting medium.
The large drain hole facilitates easy de-plugging and specially designed irrigation
channels in the tray allow excess water drainage. The insert and tray are
manufactured from fully re-cycled HIPS (High Impact Polystyrene), are tough,
durable and fit standard seed tray size propagators.
Maximise your success rate
Faster more vigorous rooting
Organic and fully biodegradable
Simple to use and easy to pot on
No mess, no fuss, just excellent results
Why use the Smart CO2 Bag?
The Smart CO2 Bag is very small and easily affordable bag producing carbon dioxide for your plants. It can multiply the growing speed of your plants and make fruits ripen faster improving taste, color and crops.
The Smart CO2 Bag is safe to use, easy to setup without any maintenance required. It is the smallest and by far the most effective solution available on the market.
What is carbon dioxide?
Being like the oxygen to us humans, carbon dioxide is one of the most important components of growing up plants. All plants need carbon dioxide to grow. If a plant cannot get enough carbon dioxide from the air, it will grow slower. The Smart CO2 Bag is a powerful and easy way to add more carbon dioxide to your green room without overspending.
How To Use the Smart CO2 Bag
When and where to use it?
Get a Smart CO2 Bag 2-3 weeks after planting your seeds. Make 6 holes in top of the bag and hang it above your plants. In large green rooms, hang the bag over the aisles. TheSmart CO2 Bag only produces carbon dioxide in temperatures above 18 ºC (64 ºF). Store the closed bag in a dry and cool place under 18 ºC (64 ºF).
How long does it last?
When the Smart CO2 Bag comes into contact with oxygen, it will start producing carbon dioxide. However it can take a few days before production starts. Depending on the air circulation in the green room, one Smart CO2 Bag will produce enough carbon dioxide for an area of 10 m2 (170 ft2) for up to 3 months
How to maximize the benefits?
With the extra carbon dioxide, your plants can withstand temperatures that are 3-5 ºC (5-9 ºF) higher than usual.
COMPACT SIZE, MAXIMUM OUTPUT!
1350 - 1500 PPM!!!
(IN 10M X 10M AREA)
Keep out of reach of children
Please Select which size you require
The Exhale CO2 bag cultivates carbon dioxide 24 hours a day with no need to refill bottles or use expensive production units.
Maintenance Free: No heat, No electricity, Just CO2.
VitaLink PlantStart 250ml, 1 & 5 Litre
VitaLink PlantStart is the ideal propagation nutrient and has been developed to help young plants grow well. It contains a key ratio of boron and calcium which is scientifically proven to promote fast and healthy early growth. This seedling feed contains everything cuttings and seedlings require for fast and healthy rooting during this crucial stage of plant growth.
Key Features:
Promotes fast and healthy root development
Proven to significantly reduce standard rooting times
Boosts resistance to infection and disease
Increases your chance of success at this difficult and crucial stage
Provides the basis for overall healthy plants
Dosage:
Pre-soaking propagation = 3-4ml/L.
Seedlings/rooted cuttings = 6-8ml/L.
The PLANT!T YoYo tightens as your plant grows, eliminating the need to re-hang everyday.
It comes with a 1.4m fully retractable line and is ideal for fruiting crops e.g. tomatoes or other vine crops.
Designed to secure and support as well as train a variety of unruly or heavy cropping plants in their desired position.
Can also be used to support heavy cropping trusses.
Simply wrap around your plant and secure around the stem with the hook and watch your plants grow straight and true.
"YoYo's are a very useful device for the tomato grower and I shall be using them every season from now on!" - Nick Chenhall - Tomato Growing
The perfect cutting and germination product.
This insert and tray has been completely redesigned and is considered to be the best on the market.
It is filled withStonewool plugs and is tough and durable.
It does not allow for any pooling.
It really does grow big every time!
In every case you can be assured of:
- homogeneity and reliability in accordance with the highest standards;
- uniform emergence and plant growth;
- optimal air/water balance in the plugs;
- excellent firmness and shape retention;
- outstanding processibility and contact with the propagation block.
The reach through mesh allows the trellis netting to handle more weight and remain taught and therefore provide stronger support.
This product is non tangle which can be a common problem with netting.
The world's first remote controlled CO2 dispenser with built in light sensor.
Airbomz brings you the latest innovative technology in hydroponic plant growth for explosive indoor growing.
Designed for small to medium grow tents, by omitting measured amounts of CO2 at set intervals the ambient CO2 levels in your grow space will be raised to an ideal 1200 ppm which is perfect for explosive plant growth.
- Produces no heat
- Battery powered (not included)
- Can increase your yield up to 50%
- Shortens the crop cycle
- It allows higher growing temperatures and humidity
Why use the Smart CO2 Bag?
The Smart CO2 Bag is very small and easily affordable bag producing carbon dioxide for your plants. It can multiply the growing speed of your plants and make fruits ripen faster improving taste, color and crops.
The Smart CO2 Bag is safe to use, easy to setup without any maintenance required. It is the smallest and by far the most effective solution available on the market.
What is carbon dioxide?
Being like the oxygen to us humans, carbon dioxide is one of the most important components of growing up plants. All plants need carbon dioxide to grow. If a plant cannot get enough carbon dioxide from the air, it will grow slower. The Smart CO2 Bag is a powerful and easy way to add more carbon dioxide to your green room without overspending.
How To Use the Smart CO2 Bag
When and where to use it?
Get a Smart CO2 Bag 2-3 weeks after planting your seeds. Make 6 holes in top of the bag and hang it above your plants. In large green rooms, hang the bag over the aisles. TheSmart CO2 Bag only produces carbon dioxide in temperatures above 18 ºC (64 ºF). Store the closed bag in a dry and cool place under 18 ºC (64 ºF).
How long does it last?
When the Smart CO2 Bag comes into contact with oxygen, it will start producing carbon dioxide. However it can take a few days before production starts. Depending on the air circulation in the green room, one Smart CO2 Bag will produce enough carbon dioxide for an area of 10 m2 (170 ft2) for up to 3 months
How to maximize the benefits?
With the extra carbon dioxide, your plants can withstand temperatures that are 3-5 ºC (5-9 ºF) higher than usual.
COMPACT SIZE, MAXIMUM OUTPUT!
1350 - 1500 PPM!!!
(IN 10M X 10M AREA)
Keep out of reach of children
X-Stream Aeroponic Propagation
Want to root cuttings faster, with a near 100% success rate and no root rot or drying out?
Then choose the X-Stream aeroponic propagator. The Xstream mists cuttings to maintain ideal moisture and oxygen levels.
Cuttings are suspended in mesh pots in the propagator’s misting chamber and are constantly misted.
DESCRIPTION
The X-Stream Aeroponic propagator creates perfect conditions for cultivating cuttings reliably and quickly.
The mist prevents root rot and drying out and provides unrestricted access to oxygen, the large vents in the lid provide humidity control, and the heated version enables you to raise cuttings in an unheated area all year.
Because the mist is constant, there’s no need to monitor water levels every day.
A higher % of your cuttings will root (many growers report 100% success rates) and the plants will be faster growing and more resistant to stress and disease throughout their life thanks to their incredibly healthy start.
X-Stream Aeroponic propagators have grooves in the lid to fit the Sunblaster T5 propagation lights. These nanotech enhanced lights run cool enough to be placed onto the propagator lids with zero risk of damage.
WHY THEY ARE GREAT
The X-Stream creates the perfect environment for root development which dramatically improves the success rate of cuttings and speeds up their root development. The condition of the cuttings can be checked quickly with minimal impact on the cutting ensuring that the cuttings are as healthy as possible when they are potted on.
X-Stream propagators have specially designed lids to fit Sunblaster T5 lights. Simply place the light onto the lid and your ready to grow. – SEE EBAY ITEM NUMBER – 262916423681
System Size L x W x H cm - Tank Volume - No. of plants
12 Site Propagator - 59 x 46.5 x 44 - 8 Litres - 12
20 Site Propagator - 59 x 46.5 x 44 - 8 Litres - 20
40 Site Propagator - 77 x 40.5 x 45 - 14 Litres - 40
120 Site Propagator - 115 x 64.5 x 46 - 40 Litres - 120
HINTS AND TIPS
Pump - leave the pump on 24/7~
Feeding - when roots begin to show add nutrients at a quarter of the manufacturers recommended dosage.
Ventilations - once roots are showing, open the vents slightly. Gradually increase the opening every day and remove the lid completely to harden off for a couple of days before transplanting on.
Rooting gels and powder can still be used. When the cutting is dipped, all active ingredients are absorbed immediately and will not be ‘washed off’ by the misting.
Transplanting into soil or coco
Remove from the X-Stream when roots begin to poke through the mesh pot. Pot on into 3” or 4” pots and grow on for a few days before transplanting on.
Transplanting into hydro
Remove from the X-Stream when roots have grown 3” to 4” from the bottom of the mesh pot. Transplant directly into the hydro system.
Transplanting into rockwool
Remove from the X-Stream when roots have grown 3” to 4” from the bottom of the mesh pot. Punch a hole in the bottom of a 3” or 4“ cube, sandwich the cutting between two halves of an Grodan SBS cube allowing the roots to trail through the punched hole. Transplant immediately.
Please select above which item you require
2ft lamps are 24w (6500k) each
T5 delivers performance and flexibility along with high lumen output in any growing environment.
Different options listed below
2ft (60cm)
2 lamp - 2 x Switches on/off
4 lamp - 4 x Full, 2x Outside lights or 2 x Middle
6 lamp - 6 x Full, 2x Outside lights or 4 x Middle
Clonex Mist
Clonex Mist is the latest innovation in cloning technology, developed to make cloning even more successful.
An innovative, complex blend of amino acids and mineral nutrients to accelerate healthy rooting process.
ROOT!T First Feed is specially formulated to give young plants the best start in life.
It contains everything required for healthy growing during the propagation stage.
ROOT!T First Feed promotes fast and healthy root development and is proven to reduce standard rooting times.
It boosts resistance to infection and disease and increases your chance of success at this difficult and crucial stage.
This product comes with a book on how to grow from seeds or cuttings.
LightHouse StretchNet is made from the highest quality elasticised cord that is knotted into one piece of netting to give additional strength.
Simply attach the StretchNet to the poles of your tent at the desired height to give support to your growing plants.
For best results - use 2 or 3 StretchNets per 2m high tent dependning on the height of your pot. Size can be adapted and suitable for tents up to 1.2m2.
Hooks will fit poles up to 23mm diameter.
Please Select Size tray required above
Options:
150 Cube Tray - 25x25x40mm Cubes (small)
77 Cube Tray - 35x35x40mm Cubes (large)
This will come with Lid, selected size insert & Tray (see picture)
Please Note: the lid may have green air vents not black as picture
Cultilène Benefits
An effective air-to-water ratio
Reliable Homogeneity
Great Strength & Dimensional Stability
Excellent Controllability
Inert and pathogen-free
Cultilène is one of the world's leading substrate producers.
They have a great reputation in the industry as a company that puts the grower first.
The Cultilène stonewool cubes are made to fit the large hole blocks and are supplied in an easy-to-use tray.
The cubes have an effective air-to-water ratio and a reliable homogeneity with great strength and dimensional stability and excellent controllability.
This media is inert and pathogen free.
The ROOT!T Large Propagator Lid and the ROOT!T Large propagator tray are no only great value, their light weight design mean that they have many uses.
The large lid has two vents for humidity control and the whole lid can be used on its own as a large cloche when growing outdoors.
Dimensions
tray : 57cm x 35.5cm x 5.5cm
Lid: 57cm x 37cm x 15cm
The PLANT!T® Circular Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.
No plumbing needed- easy to install and simple to use. The water timer is also weather resistant and has an auto safety valve shut off for when the battery is low.
Gravity feed and main pressure irrigation controller
The Swiftair Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.
Key Features:
2 easy steps to programme – turn RUN TIME dial to desired irrigation time and turn FREQUENCY dial to desired time you want between irrigations.
Benefits:
Ideal for gravity feed allotment systems to control feed from a water butt/reservoir
Weather resistant
Operated with two 1.5v AAA alkaline batteries (not included) that can last a full season without needing to be changed
Auto safety valve shut-off when battery power is low and programme delay button for when you need to do plant maintenance work and don’t want to be irrigating
Comes with all required fittings and inline filter
Technical Specifications:
Working pressure range: 5-150 PSI
Connection: ¾ male/female tap/hose connector
Frequency: Can select to irrigate every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week
Run (on) time: 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes
Description : Green House GH70 ideal for propagation, cuttings and conservation of mothers plants.
Weight 1.9 kg
Dimensions: 70 x 70 x 70 cm
Windows: 2x30x20 cm mesh window and removable flap
Socks
1x Cable Ø7 mm
Accessories included
1x E40
1x lamp CFL 65W
1x CFL 65W
Fits everywhere
Compact
Lightproof
Natural ventilation
Culture station designed with a highly reflective Mylar
Space for up to 2 cultivation trays
7mm diameter fiber glass rods
Permissive fabric creating a uniform temperature and humidity in the tent
Equipped with a CFL 65W lamp specially designed for cuttings
Main Technologies :
Main Fabric Mylar 190T
Poles Ø7mm - Fiber glass
Bag
Fabric 210D
PRODUCT INFORMATION
NUTRICULTURE SPREADER MAT - 300 Metre Roll
Please Note we will cut this to the length selected a full roll is 300 Metre
Nutriculture spreader mat to be used on all NFT (Nutrient Film Technique) Systems.
In NFT systems the use of spreader mats is recommended for an even distribution of nutrient solution to the roots.
Placed under the pots of seedlings it prevents the roots from drying out and provides a well-balanced growth of roots and plants.
Nutriculture´s spreader mats are highly absorbant so an even water-distribution is ensured.
Details:
Length: 300m on a roll
Colour: white
Material: highly absorbant fine fleece
Guidance for use:
Cut to the lengths you require and place onto your channels, lay parallel strips if necessary
Plastic coated with a cutting tool built into the dispenser
Ideal for tying plants vegetables and vines
50M roll
The PLANT!T Herb Garden is a handy all-in-one self-watering system that will allow you to grow fresh herbs and lettuces in your home.
Using a simple wick system, the PLANT!T herb garden will look after itself by only taking what the plant requires, avoiding over and under watering. Easily refill the reservoir with water / nutrients when the indicator level is showing low, via the watering hole on the top of the pot.
The planting pot can be removed from the lighting stand when potting up or harvesting your plants. It also allows for easy cleaning before starting with new plants.
Plants will receive supplemental light with a built-in full spectrum LED grow light with boost setting. This will alternate through phases of white and purple light to provide an optimal light cycle for all stages of plant growth and development. The LED can also be dimmed if it is not suitable for your living space.
This compact system is perfect for the kitchen where you can keep fresh herbs and lettuces to hand whilst cooking!
Product Dimensions: 325 x 150 x 330 mm (lwh)
Technical Specifications: 1 year warranty. Input Voltage 24 V DC , Power 7.5 W , IP rating IP20
Grow healthy plants from seed in your home or greenhouse,
Suitable for striking cuttings,
No root disturbance, plant straight into the ground when the roots appear through the side of the pot,
Instructions for Use:
Fill each pot with seed and cutting compost
Water well with a fine spray
Place seed(s) or Cutting in each pot and cover with a layer of compost
Place in a bright position but not in direct sun light
Never allow compost to dry out, keep moist at all times
Windowsill Tray
Windowsills can offer ideal light conditions for house plants, so this windowsill sized self watering tray will be of value to all homeowners as well as being particularly useful as a holiday watering system. Once filled with water, it will keep potted plants watered for up to 14 days.
The unit features a base reservoir tray which contains a 'stilted' inner support platform which is covered in capillary matting. The base tray provides a reservoir of 3.4 litres of water. By ensuring that compost exposed at the bottom of plant pots is in contact with the capillary matting, the plants will water themselves!
The base tray and inner support platform are both manufactured from recycled polystyrene.
Size Check: 76cm (30") Long 17cm (6.5") Wide 3.5cm (1.5") High
Large Tray
In essence, this is a mini capillary table which will keep potted plants watered for up to 14 days. The unit features a base reservoir tray which contains a 'stilted' inner support platform which is covered in capillary matting.
The base tray provides a reservoir of 8 litres of water. By ensuring that compost exposed at the bottom of plant pots is in contact with the capillary matting, the plants will water themselves! Invaluable for keeping plants watered for those going away on holiday. The size of the unit also makes it particularly useful for use in greenhouses.
The base tray and inner support platform are manufactured from recycled plastic - polypropylene and polystyrene respectively.
Size Check: 56cm (22") Long 40cm (16") Wide 4cm (1.5") High
PLANT!T Neoprene cloning collars support cuttings with our without the use of artificial media.
Propagation can be done with our without the use of a net pot.
They are designed to hold new cuttings without damaging any of the plants delicate tissue.
A slit from the centre makes inserting and removing cuttings simple.
Size: 50mm diameter/12.7 mm deep.
Fits our 51mm Net pot.
Ideal for use with clone machines, hydro systems and aeroponics.
The Hydroponic System is a practical way to start growing plants .
The Bubble Tub Hydroponic System is a professional 6 site hydroponic growing set up.
Simple and easy to use, and will have you growing top quality plants in no time.
All systems utilize the Deep Water Culture (DWC) hydroponic plant growing method.
DWC hydroponics provides plants with highly oxygenated and nutrient enriched water directly to the root increasing plant growth and speeding plant development.
Your plants will grow faster and larger in the Bubble Tub when compared with soil grown plants.
SHOGUN START is a delicate nutrient formulated to maximise plant establishment and root development. Containing balanced micro and macro nutrients alongside the SmartZen maximiser ingredient. SHOGUN START gives your young plants full strength trace elements whilst still maintaining a low overall strength.
SHOGUN START encourages auxins to move from the leaf tissue to the stem for rapid rooting and fast establishment of all of the structures that the plant needs later on for maximized yields and performance
KEY FEATURES
Encourages the movement of auxins from the leaf tip to the rooting point.
Accelerates germination.
Encourages faster root striking in cuttings.
Optimal concentration of micronutrients for healthy development of young plants. This is the same as it would be in a full-strength base nutrient, whilst keeping the NPK low.
The Enhancer is an all natural CO2 generator made from 100% organic ingredients. This safe and effective solution for CO2 supplementation creates a blast of CO2 that can reach 1200 PPM in a 12 x 12 x 12 foot area for up to 2 weeks (extraction dependent).
Activate The Enhancer by adding 1 litre of warm water, placing the lid back on, removing the sticker on the lid, covering the small hole with your thumb and giving the bottle a quick shake. For optimal performance shake The Enhancer once a day in a 12 x 12 x 12 foot area and once every second day in a 6 x 6 x 6 foot area.
Simple and easy to use and effective!
This safe and effective solution for CO2 supplementation creates a blast of CO2 that can reach 1200 PPM in a 12x12x12 area for up to 2 weeks (extraction dependent).
A collaboration between Nutriculture and IWS, the Vegigator range was developed over 12 months of constant trialling and testing!
Available in 6, 12 and 24 pot configurations, using high quality, 3L pots. All systems are engineered to fit into a 1.2m square grow room.
The Vegigator System comprises of a reservoir, a tray, pots, and a pump with delivery system attached.
The tray sits directly onto the reservoir, with the support of a stand. A timer is used to set the frequency at which nutrient solution is pumped from the reservoir to FLOOD the tray and is then allowed to EBB away.
As the tray floods the plants take all the water and nutrients they need. All stale air is expelled from the root zone then, as the solution drains away, fresh oxygen is pulled back into the root zone.
The amount of nutrient solution used is easily measured and this allows experienced growers to tailor feeding schedules to get the optimum growth from their plants.
Please
select from drop down menu which items you require
The ROOT!T Large Propagator Lid and the ROOT!T Large
propagator tray are no only great value, their light weight design mean that
they have many uses.
The large lid has two vents for humidity control and the
whole lid can be used on its own as a large cloche when growing outdoors.
Th tray has been designed to be large enough to fit a whole
plug tray (Cultilene/Jiffy) or used with loose growing media as a seed
tray/hardening-off tray.
Dimensions
tray : 57cm x 35.5cm x 5.5cm
Lid: 57cm x 37cm x 15cm
Insert: 52.5cm x 32cm x 5cm
A highly concentrated bio-culture containing over 20 strains of beneficial micro organisms. Once activated and applied as a foliar feed, Essence will quickly colonise the surface of leaves and stems forming an effective barrier against airborne pathogenic fungi; combating leaf fungal infections, mildew and botrytis. Unlike other products on the market to date. Essence can be used right up to full maturity of fruiting crops.
Contents
- 25g Essence
- Molasses
- 125ml Plant Magic Catalyst
Electronic temperature controller is compatible with all heat mats and is an optional accessory for the Heat Mats.
The thermostat controls the temperature of heat mats evenly in colder or warmer than normal environments. It provides constant optimum temperatures for specific plants.
It has an easy plug-in operation with an illuminated indicator.
Features:
Easy to use and control
Temperature control
range 20ºC to 42ºC
Controls temperature of heat mats evenly in colder/warmer than normal environments
Provides constant optimum temp for specific plants.
Easy plug-in operation
Indicator light
Simple to use
2 YEAR WARRANTY
Vita Launch is a liquid growth stimulator for seedlings and cuttings. Vita Start has a wide range of activity. It makes for a great and strong root system and accelerated uptake of nutrients. it also ensures a faster cell division ensuring plants have a strong, healthy start in life.
Ensures that the donor plant is at its best to deliver cuttings with vigour.
Benefits:
Maintains strong growth and good health in plants repeatedly used to take cuttings from
Improves and promotes side shoot development
Improves and enhances recovery time of your donor plant
Cultilène Stonewool OptimaXX slabs are for the final stage of planting.
Recommended for larger long term crops with extensive roots such as peppers and cucumbers.
The mainly horizontal fibre structure of the OptimaXX product ensures good root penetration throughout the slab and allows control of both water content and EC.
The fibre structure ensures optimum exchange within the slab and accurate control of moisture content and nutrition.
Typically seedlings in blocks are placed onto slabs.
The Cultilène OptimaXX offers a well aerated slab in all seasons and the roots stay active as the excess water runs off quickly and efficiently.
ROOT!T Potting Biscuits contain the complex biology of garden soils to support the efficient transfer of nutrients and water to plants. Using ROOT!T Potting Biscuits will allow you to get the best out of your seedlings. Simply place the biscuit at the bottom of your planting hole, place the plant ontop and continue to plant as usual.
Swells up to 5 X original size when watered
Steady release of nutrients
Water retaining crystals to prevent drying out
Auxins stimulate root development
Essential trace elements for strong plant growth
Peat free
Uses compressed coir fibres derived from sustainable coconut pressing
Designed to treat the soil as well as the plant
PLANT!T Watering Ring
The PLANT!T Watering Ring is ideal for use with DIY kits or
systems. It comes with a laser-cut watering ring and a T-piece that 13mm
(1/2") tubing can be attached to.
The laser cutting process used on the watering ring
eliminates swarf that creates very clean holes and reduces the likelihood of
blockages.
Used on a Brummie Bubbler kit
My CO2 Grow
Grows edible Reishi Mushrooms
Up to 180 days of CO2 making abou 800ppm in a 1.2m2 area
Reshi mushrooms (ganoderma Lucidum)
My CO2 Bloom
Grows edible Oyster Mushrooms
Up to 60 days of CO2 making about 1200ppm in a 1.2m2 area
Oyster Mushrooms (pleurotus Ostreatus)
Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants.
While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations.
SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development.
Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start.
Safety should come before anything esle, that is why our CO2 release components are made by GasArc, widely renowned as the best hardware on the market.
Our CO2 kit comes ready wired and assembled for use with complete 10 meters of layflat tubing.
Full instructions are included.
One year warranty.
Use only with vapor release CO2
